Ana içeriğe geç

Spin Master Hatchimal Draggle Nose Replacement

Neye ihtiyacın var

  1. Spin Master Hatchimal Draggle Nose Replacement, Plastic Wing Replacement: adım 1, 1 resimden 1.
    • lay the Hatchimal on its side.

  2. Spin Master Hatchimal Draggle Nose Replacement: adım 2, 1 resimden 1.
    • Using the plastic opening tool, push in on the purple clip.

  3. Spin Master Hatchimal Draggle Nose Replacement: adım 3, 1 resimden 1.
    • Pull the wing off of the hatchimal.

    • The wing should come off with little resistance.

  4. Spin Master Hatchimal Draggle Nose Replacement, Fur Replacement: adım 4, 2 resimden 1. Spin Master Hatchimal Draggle Nose Replacement, Fur Replacement: adım 4, 2 resimden 2.
    • Cut the fur retaining zip-tie with a pair of scissors.

  5. Spin Master Hatchimal Draggle Nose Replacement: adım 5, 2 resimden 1. Spin Master Hatchimal Draggle Nose Replacement: adım 5, 2 resimden 2.
    • Lift the fur up until it can't go further.

  6. Spin Master Hatchimal Draggle Nose Replacement: adım 6, 3 resimden 1. Spin Master Hatchimal Draggle Nose Replacement: adım 6, 3 resimden 2. Spin Master Hatchimal Draggle Nose Replacement: adım 6, 3 resimden 3.
    • Use the spudger tool to push up on the black clip to free it.

    • Pull the clip out.

  7. Spin Master Hatchimal Draggle Nose Replacement: adım 7, 3 resimden 1. Spin Master Hatchimal Draggle Nose Replacement: adım 7, 3 resimden 2. Spin Master Hatchimal Draggle Nose Replacement: adım 7, 3 resimden 3.
    • Lift fur up to reveal the next set of clips.

    • Insert a spudger to push up on the black clip to free it.

    • Pull out the clip.

  8. Spin Master Hatchimal Draggle Nose Replacement: adım 8, 2 resimden 1. Spin Master Hatchimal Draggle Nose Replacement: adım 8, 2 resimden 2.
    • Lift the fur up and over the Hatchimals Head.

    • Remove the six 12mm Phillips #00 screws from then body.

  9. Spin Master Hatchimal Draggle Nose Replacement: adım 9, 2 resimden 1. Spin Master Hatchimal Draggle Nose Replacement: adım 9, 2 resimden 2.
    • Pull the casing apart.

    • Remove the yellow speaker cable.

  10. Spin Master Hatchimal Draggle Nose Replacement: adım 10, 3 resimden 1. Spin Master Hatchimal Draggle Nose Replacement: adım 10, 3 resimden 2. Spin Master Hatchimal Draggle Nose Replacement: adım 10, 3 resimden 3.
    • Remove the three 7mm Phillips #00 screws from the head.

    • Remove the wheel base and the circuit board carefully not to damage the spring.

  11. Spin Master Hatchimal Draggle Nose Replacement: adım 11, 2 resimden 1. Spin Master Hatchimal Draggle Nose Replacement: adım 11, 2 resimden 2.
    • Push the six black fur clips out using the spudger.

    • Remove the fur completely.

  12. Spin Master Hatchimal Draggle Nose Replacement, Nose Spring Replacement: adım 12, 2 resimden 1. Spin Master Hatchimal Draggle Nose Replacement, Nose Spring Replacement: adım 12, 2 resimden 2.
    • Using the angled tweezers tool, disconnect the spring that is attached to the nose from the lever.

  13. Spin Master Hatchimal Draggle Nose Replacement: adım 13, 1 resimden 1.
    • Separate the body casing from the core and circuit board.

    • Don't damage the small wire connected from the top of the head to the circuit board.

  14. Spin Master Hatchimal Draggle Nose Replacement: adım 14, 1 resimden 1.
    • Remove a single 7mm Phillips #00 screw from the break.

    • Remove the spring.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Hector Lopez

Üyelik tarihi: 02/14/18

251 İtibar

2 adet Kılavuz yazıldı

Ekip

USF Tampa, Team S1-G5, Nance Spring 2018 USF Tampa, Team S1-G5, Nance Spring 2018 üyesi

USFT-NANCE-S18S1G5

3 Üyeler

10 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 5

Her zaman: 494