Parçalar

Hiçbir parçaya gerek yok.

  1. Flip the phone over so that the screen is facing down.
    • Flip the phone over so that the screen is facing down.

    Yorum Ekle

  2. Push the gray lever up towards the top of the phone.
    • Push the gray lever up towards the top of the phone.

    • Pull up on the battery pack and completely separate it from the phone.

    Yorum Ekle

    • Locate the 5 screws around the back casing.

    • Use a three-prong screw bit to remove all 5 screws

    Yorum Ekle

    • Use the plastic opening tool and slide it around the phone to pull apart the front and back casing.

    Yorum Ekle

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Separate the two cases.

    Yorum Ekle

    • Use the plastic opening tool to remove the motherboard from the front case.

    Yorum Ekle

    • Locate the 4 white clips of the dispaly.

    Yorum Ekle

    • Using the plastic opening tool, pull the white clips of the display away from the printed circuit board to unclip display.

    Yorum Ekle

    • Grasp the display on both sides and carefully pull the display off of the printed circuit board.

    Yorum Ekle

    • Using the plastic opening tool, carefully remove the yellow film covering the display connector.

      • Do not damage the yellow film. Ensure that it stays in one piece and does not tear.

    Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Patrick Olmstead

Üyelik tarihi: 22-10-2013

240 İtibar

2 adet Kılavuz yazıldı

Takım

Clemson, Team 13-5, Benson Fall 2013 Clemson, Team 13-5, Benson Fall 2013 üyesi

CLEM-BENSON-F13S13G5

3 Üyeler

12 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 2

Her zaman: 119