Eşyalarını Tamir Et Topluluk Mağaza

SteelSeries Apex 3 TKL Rubber Membrane Replacement

Giriş

Here is a guide on how to replace or realign a rubber membrane in a SteelSeries Apex 3 TKL. This guide will be helpful if some of your keys are not working and they are starting to stick. Making sure the rubber membrane is perfectly aligned to the back of the keys could be a solution to your problem.

Neye ihtiyacın var

  1. SteelSeries Apex 3 TKL Rubber Membrane Replacement, Back Panel: adım 1, 1 resimden 1.

    • Use a JIS #00 screwdriver to remove all back panel screws.

    Düzenle

  3. SteelSeries Apex 3 TKL Rubber Membrane Replacement: adım 2, 2 resimden 1. SteelSeries Apex 3 TKL Rubber Membrane Replacement: adım 2, 2 resimden 2.

    • Use the iFixit opening pick to pry open the back panel by running it along the edges of the keyboard.

    Düzenle

  4. SteelSeries Apex 3 TKL Rubber Membrane Replacement, Rubber Membrane: adım 3, 1 resimden 1.

    • Lift off the rubber membrane.

    • When replacing, make sure the back stubs align with the back of each key on the keyboard.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

1 tane daha katılımcı ile

Tyler Pepe

Üyelik tarihi: 03/20/24

169 İtibar

2 adet Kılavuz yazıldı

Rozetler: 2

Ekip

UMass Dartmouth, Team 1-3, Santin Spring 2024 UMass Dartmouth, Team 1-3, Santin Spring 2024 üyesi

UMASSD-SANTIN-S24S1G3

3 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 4

Son 30 gün: 8

Her zaman: 17