Eşyalarını Tamir Et Topluluk Mağaza

Sublue WhiteShark Mix Underwater Scooter Activation Buttons Replacement

Giriş

This guide shows you how to replace the two activations buttons for the Sublue WhiteShark Mix Underwater Scooter.

  1. Sublue WhiteShark Mix Underwater Scooter Activation Buttons Replacement, Top Floater Removal: adım 1, 1 resimden 1.

    • Remove the black screw by rotating it counterclockwise.

    Düzenle

  2. Sublue WhiteShark Mix Underwater Scooter Activation Buttons Replacement: adım 2, 1 resimden 1.

    • Hold the device in place and pull up on the floater.

    Düzenle

  3. Sublue WhiteShark Mix Underwater Scooter Activation Buttons Replacement: adım 3, 1 resimden 1.

    • Remove the top floater.

    Düzenle

  4. Sublue WhiteShark Mix Underwater Scooter Activation Buttons Replacement, Battery: adım 4, 1 resimden 1.

    • Turn the device upside-down.

    Düzenle

  6. Sublue WhiteShark Mix Underwater Scooter Activation Buttons Replacement: adım 5, 1 resimden 1.

    • Press the push button in while sliding the planner towards the back of the device to remove the battery panel.

    Düzenle

  7. Sublue WhiteShark Mix Underwater Scooter Activation Buttons Replacement: adım 6, 1 resimden 1.

    • A push tab holds the battery in.

    Düzenle

  8. Sublue WhiteShark Mix Underwater Scooter Activation Buttons Replacement: adım 7, 1 resimden 1.

    • Push the tab in and pull the battery outward to remove it.

    Düzenle

  9. Sublue WhiteShark Mix Underwater Scooter Activation Buttons Replacement, Lower Panel: adım 8, 1 resimden 1.

    • Remove the ten Phillips screws on the bottom of the device. Remove the bottom panel.

    Düzenle

  10. Sublue WhiteShark Mix Underwater Scooter Activation Buttons Replacement: adım 9, 1 resimden 1.

    • Pull the panel forward.

    • You may need to use pry tools to aid in separating the panels.

    Düzenle

  11. Sublue WhiteShark Mix Underwater Scooter Activation Buttons Replacement, Activation Buttons: adım 10, 1 resimden 1.

    • There are two action buttons on each side of the main body.

    Düzenle

  12. Sublue WhiteShark Mix Underwater Scooter Activation Buttons Replacement: adım 11, 1 resimden 1.

    • Push on the top outer corner of each action button to pop them out of place.

    Düzenle

  13. Sublue WhiteShark Mix Underwater Scooter Activation Buttons Replacement: adım 12, 1 resimden 1.

    • After each action button is released, pull outward to remove.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

3 tane daha katılımcı ile

Benjamin J Farland

Üyelik tarihi: 10/30/23

269 İtibar

2 adet Kılavuz yazıldı

Rozetler: 5

+2 tane daha rozet

Ekip

UMass Dartmouth, Team 2-6, Gulbrandsen Fall 2023 UMass Dartmouth, Team 2-6, Gulbrandsen Fall 2023 üyesi

UMASSD-GULBRANDSEN-F23S2G6

4 Üyeler

6 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 8

Her zaman: 42