Ana içeriğe geç

Giriş

This guide will show the steps involved in replacing the screen.

  1. Press firmly on lower portion of the back cover and slide the cover towards the bottom to remove cover.
    • Press firmly on lower portion of the back cover and slide the cover towards the bottom to remove cover.

  2. Pull on the plug carefully until it releases from the port and simply pull the battery out after.
    • Pull on the plug carefully until it releases from the port and simply pull the battery out after.

  3. Unscrew the six 6.01mm  Phillips one screws  that hold the casing together.
    • Unscrew the six 6.01mm Phillips one screws that hold the casing together.

  4. MacBook Pil Tamir Setleri

    Başlangıç $69.99

    Buy Now

    MacBook Pil Tamir Setleri

    Başlangıç $69.99

    Buy Now
  5. Pry open the casing with a plastic opening tool. You will want to use a thin blue plastic opening tool to get in between the creases of the casing. Pry open the casing with a plastic opening tool. You will want to use a thin blue plastic opening tool to get in between the creases of the casing.
    • Pry open the casing with a plastic opening tool. You will want to use a thin blue plastic opening tool to get in between the creases of the casing.

  6. Unscrew the five 4.47mm Phillips one screws that must be taken out to detach the motherboard from the casing.
    • Unscrew the five 4.47mm Phillips one screws that must be taken out to detach the motherboard from the casing.

  7. Detach the motherboard from the screen by taking out the input on the left marked in red as well as carefully detaching  the ribbon from the screen which is also marked in red in the middle.
    • Detach the motherboard from the screen by taking out the input on the left marked in red as well as carefully detaching the ribbon from the screen which is also marked in red in the middle.

  8. Separate the  touch screen (the grey and white specs) from the metal casing it is enclosed in by bending the casing outward.
    • Separate the touch screen (the grey and white specs) from the metal casing it is enclosed in by bending the casing outward.

    • Again this can be done with the plastic opening tool. You will want to do this around the entire casing before trying to pry it out which is the next step.

    • This is the most tedious and time consuming step.

  9. Pry the screen open with the blue  plastic opening tools while using another plastic opening tool as a jack to remain in place while you pry around the entire screen. Pry the screen open with the blue  plastic opening tools while using another plastic opening tool as a jack to remain in place while you pry around the entire screen.
    • Pry the screen open with the blue plastic opening tools while using another plastic opening tool as a jack to remain in place while you pry around the entire screen.

  10. Lift the screen away from the case. Be careful, the screen shown lifted here is actually put together in multiple layers so you'll want to be careful not to separate  them.
    • Lift the screen away from the case. Be careful, the screen shown lifted here is actually put together in multiple layers so you'll want to be careful not to separate them.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Austin_Parkes

Üyelik tarihi: 21-03-2018

337 İtibar

3 adet Kılavuz yazıldı

Takım

IUPUI, Team S4-G4, Baechle Spring 2018 IUPUI, Team S4-G4, Baechle Spring 2018 üyesi

IUPUI-BAECHLE-S18S4G4

4 Üyeler

6 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 1

Her zaman: 79