Ana içeriğe geç

Giriş

Prereq-only guide for disconnecting the supply tube from a gravity flush toilet.

Aletler

Hiçbir alet belirtilmedi.

Parçalar

Hiçbir parça belirtilmedi.

  1. Shut off the stop valve underneath the toilet by turning it clockwise until it becomes tight. The appearance of this valve may differ from toilet to toilet, but most operate the same.
    • Shut off the stop valve underneath the toilet by turning it clockwise until it becomes tight.

    • The appearance of this valve may differ from toilet to toilet, but most operate the same.

  2. Dizüstü Bilgisayar Bataryaları

    An easy fix for a big power boost.

    Hemen Alışveriş Yapın

    Dizüstü Bilgisayar Bataryaları

    An easy fix for a big power boost.

    Hemen Alışveriş Yapın
  3. Place a bucket under the supply tube to catch any dripping water. Turn the coupling nut on the supply tube clockwise until it releases from the threaded shank on the bottom of the tank. Turn the coupling nut on the supply tube clockwise until it releases from the threaded shank on the bottom of the tank.
    • Place a bucket under the supply tube to catch any dripping water.

    • Turn the coupling nut on the supply tube clockwise until it releases from the threaded shank on the bottom of the tank.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Ron Davis

Üyelik tarihi: 17-02-2015

22.255 İtibar

13 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 0

Her zaman: 77