Eşyalarını Tamir Et Topluluk Mağaza

SwagTron T1 Back Panels Replacement

Giriş

This explains what will be necessary to not only replace the back panels, but also open the SwagTron T1 to have access to other parts.

Neye ihtiyacın var

  1. SwagTron T1 Back Panels Replacement, Back Panels: adım 1, 1 resimden 1.

    • Ensure that the SwagTron is off.

    • Turn the SwagTron upside down to see the underside.

    Düzenle

  3. SwagTron T1 Back Panels Replacement: adım 2, 3 resimden 1. SwagTron T1 Back Panels Replacement: adım 2, 3 resimden 2. SwagTron T1 Back Panels Replacement: adım 2, 3 resimden 3.

    • Unscrew the eighteen 10mm screws that secure the back panels using a Phillips #2 screwdriver.

    • The screws are tightly in place. It will take effort to screw them out.

    • The panel is still attached to the SwagTron by wires that go to the motherboard.

    • Carefully lift the panels off

    Düzenle

  4. SwagTron T1 Back Panels Replacement: adım 3, 3 resimden 1. SwagTron T1 Back Panels Replacement: adım 3, 3 resimden 2. SwagTron T1 Back Panels Replacement: adım 3, 3 resimden 3.

    • Follow the wires from the panels to the motherboard.

    • You may need to cut any zip ties that are holding the wires together.

    • There is one connection on the battery side and three on the other side that must be removed.

    • These connections may be difficult to remove. Try to securely press the connection and pull firmly.

    • Your back panels are now completely removed.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

4 tane daha katılımcı ile

Adrian Abarca

Üyelik tarihi: 04/18/17

360 İtibar

2 adet Kılavuz yazıldı

Rozetler: 10

+7 tane daha rozet

Ekip

Cal Poly, Team S17-G5, Banghart Spring 2017 Cal Poly, Team S17-G5, Banghart Spring 2017 üyesi

CPSU-BANGHART-S17S17G5

4 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 2

Son 30 gün: 3

Her zaman: 663