Eşyalarını Tamir Et Topluluk Mağaza

Sylvania SDVD9004 Motherboard Replacement

Giriş

This guide uses incorrect tools. Use an ESD safe tool, such as a nylon spudger, to complete steps that involve delicate internal components.

Neye ihtiyacın var

  1. Sylvania SDVD9004 Motherboard Replacement, Back cover: adım 1, 1 resimden 1.

    • Remove ten 7mm Phillips #0 screws.

    • Remove four 5mm Phillips #0 screws.

    Düzenle

  2. Sylvania SDVD9004 Motherboard Replacement: adım 2, 2 resimden 1. Sylvania SDVD9004 Motherboard Replacement: adım 2, 2 resimden 2.

    • Flip the device over.

    • Lift the top.

    Düzenle

  3. Sylvania SDVD9004 Motherboard Replacement: adım 3, 1 resimden 1.

    • This guide uses incorrect tools. Use an ESD safe tool, such as a nylon spudger, to complete this step.

    Düzenle

  5. Sylvania SDVD9004 Motherboard Replacement, CD Drive: adım 4, 3 resimden 1. Sylvania SDVD9004 Motherboard Replacement, CD Drive: adım 4, 3 resimden 2. Sylvania SDVD9004 Motherboard Replacement, CD Drive: adım 4, 3 resimden 3.

    • This guide uses incorrect tools. Use an ESD safe tool, such as a nylon spudger, to complete this step.

    • Wedge head lightly between drive and bottom of tab.

    • Repeat on both sides.

    • Gently pull out ribbon

    Düzenle

  6. Sylvania SDVD9004 Motherboard Replacement: adım 5, 1 resimden 1.

    • Drive Removal

    • Use Philip's screw driver to remove three 7 mm screws.

    • Rotate counter clockwise to loosen screws.

    Düzenle

  7. Sylvania SDVD9004 Motherboard Replacement: adım 6, 1 resimden 1.

    • This guide uses incorrect tools. Use an ESD safe tool, such as a nylon spudger, to complete this step.

    • Follow the red and black cables to the motherboard point of attachment.

    • Use a Flat head screwdriver.

    • Place head of driver into the grove of plug and port.

    • Wedge on all sides evenly to work out plug slowly.

    • Remove small and large plugs.

    Düzenle

  8. Sylvania SDVD9004 Motherboard Replacement, Motherboard: adım 7, 3 resimden 1. Sylvania SDVD9004 Motherboard Replacement, Motherboard: adım 7, 3 resimden 2. Sylvania SDVD9004 Motherboard Replacement, Motherboard: adım 7, 3 resimden 3.

    • Remove Ribbon from Rear Panel

    • This guide uses incorrect tools. Use an ESD safe tool, such as a nylon spudger, to complete this step.

    Düzenle

  9. Sylvania SDVD9004 Motherboard Replacement: adım 8, 1 resimden 1.

    • Anchor screw removal

    • Use Philip's head screwdriver

    • Place head of driver into screw on mother board.

    • Rotate counter clockwise

    • Remove all four screws

    Düzenle

  10. Sylvania SDVD9004 Motherboard Replacement: adım 9, 1 resimden 1.

    • Lift motherboard to expose battery

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

2 tane daha katılımcı ile

Sarah Henry

Üyelik tarihi: 10/31/16

417 İtibar

4 adet Kılavuz yazıldı

Rozetler: 4

+1 tane daha rozet

Ekip

Baylor, Team 5-10, Williams Fall 2016 Baylor, Team 5-10, Williams Fall 2016 üyesi

BU-WILLIAMS-F16S5G10

2 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 1

Her zaman: 380