Eşyalarını Tamir Et Topluluk Mağaza

TCA Quadrant Calibration

Giriş

How to re-calibrate the levers of the Quadrant, in case they are not aligned or not providing correct input in the Flight Simulator.

    • If you have your Quadrant plugged-in, then unplug it.

    Düzenle

  2. TCA Quadrant Calibration, Lower all levers: adım 2, 2 resimden 1. TCA Quadrant Calibration, Lower all levers: adım 2, 2 resimden 2.

    • Mover each of the 3 levers to the lowest position.

    Düzenle

  4. TCA Quadrant Calibration, Press and Hold the Indicated button.: adım 3, 1 resimden 1.

    • Press and hold the button highlighted.

    Düzenle

  5. TCA Quadrant Calibration, Plug to USB port While holding the button.: adım 4, 1 resimden 1.

    • Connect your Quadrant to USB port while still holding the button.

    • Once connected, wait a few seconds and let go of the button

    • You can connect to:

    • USB port of your PC.

    • USB Port at the back of your TCA Yoke.

    • USB port of your Xbox.

    • Do not use USB Hubs or extension cables.

    Düzenle

  6. TCA Quadrant Calibration, Move all levers up: adım 5, 2 resimden 1. TCA Quadrant Calibration, Move all levers up: adım 5, 2 resimden 2.

    • Pull each levers to the highest position.

    • Move the levers smoothly for better calibration.

    Düzenle

  7. TCA Quadrant Calibration, Press the Indicated buttons: adım 6, 1 resimden 1.

    • Press these 2 buttons at the same time.

    • This should save the calibration.

    Düzenle
Bitiş Çizgisi

Yazar

1 tane daha katılımcı ile

Formica Fusca

Üyelik tarihi: 08/01/24

2.595 İtibar

15 adet Kılavuz yazıldı

Rozetler: 13

+10 tane daha rozet

0Kılavuz Yorumları

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 4

Son 30 gün: 25

Her zaman: 343