TILT Scooter Wheel Replacement

Giriş

Replacing a wheel on a TILT pro scooter is a common maintenance task that any rider should know how to do. Whether you're upgrading your wheels or replacing a damaged one, it's important to know the steps to ensure a smooth and safe ride. In this guide, we'll take you through the necessary steps to replace a wheel on your pro scooter. You'll need a few tools and a bit of patience, but with this guide, you should be able to replace your wheel in no time.

Neye ihtiyacın var

Adım 1 Wheel

TILT Scooter Wheel Replacement, Wheel: adım 1, 1 resimden 1.

Flip your scooter upside down where the handle bars and wheels touch the ground to prepare the extraction of the wheel.

Düzenle

Adım 2

With the Y-tool, loosen up the screw by turning counter-clockwise.

Düzenle

Adım 3

Turn the scooter to the opposite side, and insert and push the Y-tool through the same hole where the screw was removed to extract the parts.

Düzenle

Adım 4

Insert the new wheel and adjust the optional 10mm hex nut to support the wheel's.
The 10mm hex nut helps keep the wheel from wobbling, if there was no nut then proceed to the next step.

Düzenle

Adım 5

Insert the axle from which ever side and the opposite side to help adjust the hex nuts as you insert the axle easily.

Düzenle

Adım 6

Insert the bolt and turn clockwise to tighten up the bolt.

Düzenle

Adım 7

Flip your scooter upside up and move your scooter around to detect any lose movement.
If there is no wobble. Congratulations, you have successful replaced your wheel!

Düzenle