Ana içeriğe geç

TRS-80 Color Computer Power Cord Replacement

Neye ihtiyacın var

  1. TRS-80 Color Computer Power Cord Replacement, Outside Casing: adım 1, 1 resimden 1.
    • Flip the computer over.

    • Remove the two 24.1mm Phillips screws near the front of the case.

    • Remove the five 33.0 mm Phillips screws towards the back of the case.

  2. TRS-80 Color Computer Power Cord Replacement: adım 2, 2 resimden 1. TRS-80 Color Computer Power Cord Replacement: adım 2, 2 resimden 2.
    • Carefully flip the computer right side up.

    • Lift off the top half of the case.

  3. TRS-80 Color Computer Power Cord Replacement, Keyboard: adım 3, 2 resimden 1. TRS-80 Color Computer Power Cord Replacement, Keyboard: adım 3, 2 resimden 2.
    • Near the motherboard, gently pull the keyboard ribbon cable until it becomes free.

    • Lift the keyboard out of the case.

  4. TRS-80 Color Computer Power Cord Replacement, Motherboard: adım 4, 3 resimden 1. TRS-80 Color Computer Power Cord Replacement, Motherboard: adım 4, 3 resimden 2. TRS-80 Color Computer Power Cord Replacement, Motherboard: adım 4, 3 resimden 3.
    • Remove the nine 15.24 mm Phillips screws securing the motherboard in place.

    • When removing the spring door, make sure to keep the door closed.

  5. TRS-80 Color Computer Power Cord Replacement: adım 5, 3 resimden 1. TRS-80 Color Computer Power Cord Replacement: adım 5, 3 resimden 2. TRS-80 Color Computer Power Cord Replacement: adım 5, 3 resimden 3.
    • Remove the 5 jumper cables from the motherboard.

    • Once the jumper cables lift the motherboard up gently; it should lift out easily.

  6. TRS-80 Color Computer Power Cord Replacement, Power Cord: adım 6, 2 resimden 1. TRS-80 Color Computer Power Cord Replacement, Power Cord: adım 6, 2 resimden 2.
    • Remove the two 1.6 inch screws securing the transformer.

  7. TRS-80 Color Computer Power Cord Replacement: adım 7, 1 resimden 1.
    • Remove the power cord's three leads from the transformer.

    • Note the orientation and color of the three leads. Make sure to replace these exactely as they were.

  8. TRS-80 Color Computer Power Cord Replacement: adım 8, 2 resimden 1. TRS-80 Color Computer Power Cord Replacement: adım 8, 2 resimden 2.
    • Using needle-nose pliers, pinch the tabs of the grommet holding the power cord to the case and push the grommet out.

    • Remove the entire length of cord from the case and replace with a new one.

Sonuç

To reassemble your device, follow these instructions in reverse order.

5 farklı kişi bu kılavuzu tamamladı.

Christopher Paige

Üyelik tarihi: 01/21/11

549 İtibar

3 adet Kılavuz yazıldı

Ekip

Cal Poly, Team 11-24, Maness Winter 2011 Cal Poly, Team 11-24, Maness Winter 2011 üyesi

CPSU-MANESS-W11S11G24

4 Üyeler

10 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 2

Son 30 gün: 5

Her zaman: 2,284