Eşyalarını Tamir Et Topluluk Mağaza

Tapwave T2907US Zodiac 2 Analog Stick Replacement

Neye ihtiyacın var

  1. Tapwave T2907US Zodiac 2 Analog Stick Replacement, Back Cover: adım 1, 1 resimden 1.

    • Remove the four Torx T5 screws from the back panel.

    Düzenle

  2. Tapwave T2907US Zodiac 2 Analog Stick Replacement: adım 2, 1 resimden 1.

    • Wedge a spudger in between the front and back panel.

    • Apply leverage downwards to the spudger in order to remove the back panel.

    Düzenle

  3. Tapwave T2907US Zodiac 2 Analog Stick Replacement, Battery: adım 3, 1 resimden 1.

    • Slide the battery out from under the brown wire-tape.

    • Be careful of the wires still connected to the other end of the battery. Do not pull or damage may occur.

    Düzenle

  4. Tapwave T2907US Zodiac 2 Analog Stick Replacement: adım 4, 1 resimden 1.
    Bu adımda kullanılan alet:
    Tweezers
    $4.99
    Satın Al

    • Slowly pull the white plug from its receptor. Grasp its sides firmly with a pair of tweezers and gently wiggle from side to side.

    Düzenle

  6. Tapwave T2907US Zodiac 2 Analog Stick Replacement, Motherboard: adım 5, 1 resimden 1.

    • Unscrew the 2 Philips #00 screws on each end of the motherboard.

    Düzenle

  7. Tapwave T2907US Zodiac 2 Analog Stick Replacement: adım 6, 1 resimden 1.
    Bu adımda kullanılan alet:
    Tweezers
    $4.99
    Satın Al

    • Pull off the black memory card slot piece with tweezers.

    Düzenle

  8. Tapwave T2907US Zodiac 2 Analog Stick Replacement: adım 7, 1 resimden 1.

    • Unscrew the 2 Philips #00 screws on each side of the charging port.

    Düzenle

  9. Tapwave T2907US Zodiac 2 Analog Stick Replacement: adım 8, 2 resimden 1. Tapwave T2907US Zodiac 2 Analog Stick Replacement: adım 8, 2 resimden 2.

    • Disconnect 2 brown wire-tape ends from each end of the motherboard. Gently pull straight out with tweezers.

    Düzenle

  10. Tapwave T2907US Zodiac 2 Analog Stick Replacement: adım 9, 1 resimden 1.

    • Pull the motherboard and screen component diagonally up and left away from the auxiliary port entrance to remove.

    • Glue connecting the auxiliary port to the casing may make it difficult to remove. Gently apply force as needed.

    Düzenle

  11. Tapwave T2907US Zodiac 2 Analog Stick Replacement: adım 10, 1 resimden 1.

    • Disconnect the 2 brown wire-tape ends from the left side of the battery slot on the motherboard using tweezers.

    Düzenle

  12. Tapwave T2907US Zodiac 2 Analog Stick Replacement: adım 11, 3 resimden 1. Tapwave T2907US Zodiac 2 Analog Stick Replacement: adım 11, 3 resimden 2. Tapwave T2907US Zodiac 2 Analog Stick Replacement: adım 11, 3 resimden 3.

    • Disconnect the large brown wire-tape from the motherboard.

    • Peel the black tape back from the wire-tape using tweezers.

    • Lift the black, hinged, plastic lock with tweezers to release the wire-tape.

    • The screen and motherboard components can now be separated from each other.

    Düzenle

  13. Tapwave T2907US Zodiac 2 Analog Stick Replacement, Analog Stick: adım 12, 1 resimden 1.
    Bu adımda kullanılan alet:
    Tweezers
    $4.99
    Satın Al

    • Use tweezers to remove analog stick straight upwards from its component on the motherboard.

    • It should lock into place when installing a new one.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

3 tane daha katılımcı ile

Daniel Wiseman

Üyelik tarihi: 01/20/12

133 İtibar

6 adet Kılavuz yazıldı

Rozetler: 9

+6 tane daha rozet

Ekip

Cal Poly, Team 10-33, Amido Winter 2012 Cal Poly, Team 10-33, Amido Winter 2012 üyesi

CPSU-AMIDO-W12S10G33

4 Üyeler

10 adet Kılavuz yazıldı

0Kılavuz Yorumları

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 12

Her zaman: 1,011