Eşyalarını Tamir Et Topluluk Mağaza

Bu kılavuzda güncel değişiklikler var. En son onaylanmamış sürüme geçin.

Testing Power Cord Continuity

Giriş

A detailed guide on how to use a continuity tester to check for adequate electrical connection on a power cord.

Neye ihtiyacın var

  1. Testing Power Cord Continuity, Testing Power Cord Continuity: adım 1, 1 resimden 1.

    • Unplug the power cord from the game console and from the AC outlet. Failure to do so can result in electrical shock or death.

    • Set the multimeter to continuity test mode.

    • The setting is symbolized by a "volume indicator" as seen in the picture. If the meter is set to the correct mode, you should hear the meter beep when the leads are touched together.

    • Verify that the positive lead is plugged to the voltmeter/ ohmmeter outlet.

    Düzenle

  3. Testing Power Cord Continuity: adım 2, 1 resimden 1.

    • Test for a potential open circuit by using one multimeter lead to touch one of the prongs on the AC side of power cord. Use the other lead to touch one end of the console side of the power cord.

    • If there is an adequate electrical connection, the multimeter will beep. If it does not beep the first time, try using the lead to touch the other prong.

    • Repeat the above directions in step 2 for the other outlet and prong of the power cord.

    • If the multimeter fails to beep on any of the occasions outlined above, your power cord is open. In other words, you will need to replace the power cable.

    Düzenle

  4. Testing Power Cord Continuity: adım 3, 1 resimden 1.

    • Once you have verified that the power cord provides an adequate electrical connection, you will have to test that the cable is not shorted.

    • Test for a potential short circuit by touching each prong on the AC side of the power cord.

    • If the multimeter beeps, your power cord is bad and must be replaced immediately.

    • If your power cord is shorted, do not attempt to replug the cord into the AC outlet.

    • If your power cord has passed all of the steps above, then you have successfully tested that your power cord is in working order.

    Düzenle
Bitiş Çizgisi

146 farklı kişi bu kılavuzu tamamladı.

Yazar

10 tane daha katılımcı ile

Darren Chan

Üyelik tarihi: 10/28/09

5.321 İtibar

2 adet Kılavuz yazıldı

Rozetler: 18

+15 tane daha rozet

Ekip

Cal Poly, Team 5-1, Regan Fall 2009 Cal Poly, Team 5-1, Regan Fall 2009 üyesi

CPSU-REGAN-F09S5G1

5 Üyeler

21 adet Kılavuz yazıldı

13 Yorum

Thank you very much.

Kaky Jerry - Yanıt

Wow Wow Just a Great Guide, Now I have learned one more skill :)

Muhammad Imran - Yanıt

Brilliant love it

Liam Breen - Yanıt

Worked like a charm I feelik an electrician

hadpaulkh - Yanıt

I found this really wonderful and useful with details explained very well. I was always wondering what the electricians do with a multimeter. Now iI would buy one multimeter and do this on my own. Great and cool guide. Write more guides for other tests and verification.

Avinash S - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 93

Son 7 gün: 630

Son 30 gün: 2,627

Her zaman: 228,280