Ana içeriğe geç

Giriş

This guide will show, step by step, the battery replacement for the TI-30Xa scientific calculator.

Parçalar

Hiçbir parça belirtilmedi.

  1. Here's the fully assembled TI-30XA calculator.
    • Here's the fully assembled TI-30XA calculator.

  2. Locate the six screws on the back of the calculator. With a Phillips #1 screwdriver, loosen and remove the screws.
    • Locate the six screws on the back of the calculator.

    • With a Phillips #1 screwdriver, loosen and remove the screws.

  3. iPhone X Fix Kits

    Warranty up? No worries, we’ve got the fix.

    Hemen Alışveriş Yapın

    iPhone X Fix Kits

    Warranty up? No worries, we’ve got the fix.

    Hemen Alışveriş Yapın
  4. Find the two notches at the top of the calculator. Insert a flat-head screwdriver into one of the notches and carefully pry open the top end of the case. Locate where the case is still attached at the sides.
    • Find the two notches at the top of the calculator.

    • Insert a flat-head screwdriver into one of the notches and carefully pry open the top end of the case.

    • Locate where the case is still attached at the sides.

    • Insert the flat-head screwdriver into one side where the gap has widened.

    • Now gently pry apart the sides of the case.

    • Prying only one side will release the other side as well.

  5. Now separate the two panels from one another.
    • Now separate the two panels from one another.

  6. The batteries are located at the top. Slide the flat-head screwdriver underneath each battery and they will easily pop out.
    • The batteries are located at the top.

    • Slide the flat-head screwdriver underneath each battery and they will easily pop out.

Sonuç

To reassemble your device, follow these instructions in reverse order.

40 farklı kişi bu kılavuzu tamamladı.

Chris L

Üyelik tarihi: 17-12-2014

1.138 İtibar

3 adet Kılavuz yazıldı

21 Yorum

Thanks for the guide! :) Worked! (Although they didn't engineer the case to come apart easily...)

Scott Julien - Yanıt

I'm so glad I looked this up. VERY helpful. A simple Google search indicated that it took a 3 volt, flat 'coin' style battery. These batteries, however - I actually have in my desk at work in a 3 pack. No need to even take a trip to the store now. Oh, BTW - the 3 pack was purchased from Walgreens. They sell them in a 3 pack for around $10.

Dewellah - Yanıt

Nice post! My batteries just gave up after 15 years. This whole time I tht it was a solor calc, LOL! Thanks for the easy instructions.

lasharlavenue - Yanıt

I changed the batteries and instructions on circuit board says to "please short the reset pad after changing the batteries ". How do I do that?

Esther Reese - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 46

Son 7 Gün: 341

Son 30 Gün: 1,220

Her zaman: 58,310