Ana içeriğe geç

Texas Instruments TI-5130 Printer Unit Replacement

Neye ihtiyacın var

  1. Texas Instruments TI-5130 Printer Unit  Replacement, Printer Unit: adım 1, 2 resimden 1. Texas Instruments TI-5130 Printer Unit  Replacement, Printer Unit: adım 1, 2 resimden 2.
    • Flip the calculator over and remove the 4 main 10mm screws with a PH1 screwdriver.

  2. Texas Instruments TI-5130 Printer Unit  Replacement: adım 2, 1 resimden 1.
    • Flip the calculator back over and remove the top cover.

  3. Texas Instruments TI-5130 Printer Unit  Replacement: adım 3, 1 resimden 1.
    • Disconnect the printing unit from the motherboard by pulling up on the connector – located in the bottom left of the motherboard.

  4. Texas Instruments TI-5130 Printer Unit  Replacement: adım 4, 1 resimden 1.
    • Remove the ink cartridge by pushing the tab back then lifting it out to gain access to the screw that holds the printer in place.

  5. Texas Instruments TI-5130 Printer Unit  Replacement: adım 5, 2 resimden 1. Texas Instruments TI-5130 Printer Unit  Replacement: adım 5, 2 resimden 2.
    • Using a PH1 screwdriver remove the 10mm screw that holds down the printer unit.

    • Remove the printer unit by lifting it up.

Sonuç

To reassemble your device, follow these instructions in reverse order.

3 farklı kişi bu kılavuzu tamamladı.

Shannon Perkins

Üyelik tarihi: 09/17/15

652 İtibar

3 adet Kılavuz yazıldı

Ekip

2 Yorum

wehre did you buy the replacement printer

Tino ullrich - Yanıt

what sources are there for TI-5130 printer unit?

Norman Todd - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 6

Son 30 gün: 10

Her zaman: 2,278