Eşyalarını Tamir Et Topluluk Mağaza

The Claw Battery Replacement

Giriş

This guide will teach you how to properly replace the batteries in your Claw Machine. If you are experiencing any power related issues with your device follows these steps.

Neye ihtiyacın var

  1. The Claw Battery Replacement, Batteries: adım 1, 1 resimden 1.

    • Hold The Claw machine upright so that the controls are facing you.

    Düzenle

  2. The Claw Battery Replacement: adım 2, 1 resimden 1.

    • Turn the device upside down keeping the controls facing in your direction.

    Düzenle

  4. The Claw Battery Replacement: adım 3, 1 resimden 1.

    • Locate the battery compartment door on the bottom cover of The Claw.

    • Loosen the screw from the battery compartment door with your phillips head screwdriver.

    Düzenle

  5. The Claw Battery Replacement: adım 4, 1 resimden 1.

    • Open the door and insert the 3 D-cell batteries using the correct configuration that is labeled on the inside of the compartment.

    • If the batteries are not placed in the right configuration the device will not operate. make sure to identify positive and negative sides of the battery and follow the configuration on the device.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Yazar

2 tane daha katılımcı ile

Alain Pierre

Üyelik tarihi: 03/22/16

1.188 İtibar

9 adet Kılavuz yazıldı

Rozetler: 11

+8 tane daha rozet

Ekip

UMass Dartmouth, Team 4-8, Catania Spring 2016 UMass Dartmouth, Team 4-8, Catania Spring 2016 üyesi

UMASSD-CATANIA-S16S4G8

3 Üyeler

18 adet Kılavuz yazıldı

Bir Yorum

daiobn ht45o9iyjugggjvj nvj vnv jnkrfdoelcbigvfcofrbbvfgb4vg3rcf2edebb

Jennifer Mateo - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 5

Son 30 gün: 35

Her zaman: 2,943