Ana içeriğe geç

ThinkPad X1 Carbon Fingerprint Reader Replacement

Neye ihtiyacın var

  1. ThinkPad X1 Carbon Fingerprint Reader Replacement, Fingerprint Reader: adım 1, 1 resimden 1.
    • Unscrew the seven screws located on the back of the device.

  2. ThinkPad X1 Carbon Fingerprint Reader Replacement: adım 2, 1 resimden 1.
    • Slide the plastic opening tool along the edge of the device to separate the keyboard tray.

  3. ThinkPad X1 Carbon Fingerprint Reader Replacement: adım 3, 1 resimden 1.
    • Flip the device over and open it to lift the keyboard tray from the body of the device.

  4. ThinkPad X1 Carbon Fingerprint Reader Replacement: adım 4, 1 resimden 1.
    • Use the plastic opening tool to gently release the ribbon cable attached to the keyboard.

    • You may now place the device off to the side. The rest of the repair takes place on the keyboard tray.

  5. ThinkPad X1 Carbon Fingerprint Reader Replacement: adım 5, 1 resimden 1.
    • Locate the Fingerprint Reader and metal frame on the left side of the keyboard tray.

  6. ThinkPad X1 Carbon Fingerprint Reader Replacement: adım 6, 1 resimden 1.
    • Unscrew the two silver screws to remove the metal frame.

  7. ThinkPad X1 Carbon Fingerprint Reader Replacement: adım 7, 1 resimden 1.
    • Remove the ribbon cable connected to the board.

    • Remove and Replace the Fingerprint Reader board and metal frame.

    • This connection does not have a lock, please pull the ribbon away from the board. Do not attempt to lift the connection.

Sonuç

To reassemble your device, follow these instructions in reverse order.

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 3

Son 30 gün: 27

Her zaman: 2,673