Ana içeriğe geç

Giriş

Unfortunately, my iFixit kit has not yet arrived, so I had to use my Wiha drivers and generic spudger. This is pretty simple to do!

Parçalar

Hiçbir parça belirtilmedi.

  1. Remove the nine Phillips screws using a Philips 00 screwdriver Remove the nine Phillips screws using a Philips 00 screwdriver Remove the nine Phillips screws using a Philips 00 screwdriver
    • Remove the nine Phillips screws using a Philips 00 screwdriver

  2. MacBook Pil Tamir Setleri

    Başlangıç $69.99

    Buy Now

    MacBook Pil Tamir Setleri

    Başlangıç $69.99

    Buy Now
  3. Pry up the case carefully using a spudger. Make sure to not push the spudger in too far, as this could result in internal damage
    • Pry up the case carefully using a spudger.

    • Make sure to not push the spudger in too far, as this could result in internal damage

  4. Lift off the cover, and you're done!
    • Lift off the cover, and you're done!

Sonuç

To reassemble, place the bottom cover on and push until you hear a satisfying click. Keep doing this until the whole cover is secured. Then, screw all of the screws back in!

2 farklı kişi bu kılavuzu tamamladı.

Tanner Lange

Üyelik tarihi: 18-03-2018

981 İtibar

3 adet Kılavuz yazıldı

Takım

Francophones Francophones üyesi

Community

8 Üyeler

8 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 3

Son 30 Gün: 25

Her zaman: 493