Parçalar

Hiçbir parçaya gerek yok.

  1. Power down the TiVo and detach the power cable from the rear of the unit.
    • Power down the TiVo and detach the power cable from the rear of the unit.

      • Wait 5 minutes for the unit to fully discharge before proceeding to the next step.

    Yorum Ekle

  2. Remove the five T10 screws from the rear of the case using the Torx screwdriver.
    • Remove the five T10 screws from the rear of the case using the Torx screwdriver.

    Yorum Ekle

    • Lift up and pull back the outer casing towards the rear of the unit.

    I have the TiVo Series 2 model TCD746500 and the procedure for replacing a fan on my model is almost identical to the procedure described here, with one significant difference at this step: first pull/slide the outer casing back towards yourself and only thereafter pull it up.

    Oscar Abraham Jaeger - Yanıt

    • The fan is held in by four T15 screws on the rear of the device.

    Yorum Ekle

    • Take the wound red and black wires coming from the fan and follow them back to the logic board.

    • Unplug the connector from the motherboard.

    Yorum Ekle

    • Pull the fan towards the front and out of the TiVo unit.

    Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Svyatoslav Markeyev

Üyelik tarihi: 16-04-2010

135 İtibar

5 adet Kılavuz yazıldı

Takım

Cal Poly, Team 33-79, Johann Spring 2010 Cal Poly, Team 33-79, Johann Spring 2010 üyesi

CPSU-JOHANN-S10S33G79

4 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 2

Son 30 Gün: 9

Her zaman: 5,057