Eşyalarını Tamir Et Topluluk Mağaza

Tightening Mt. Fury Roadmaster Brake Cables

Giriş

This guide is for if you conclude that your difficulty with braking is due to your brake cables being too loose.

Neye ihtiyacın var

  1. Tightening Mt. Fury Roadmaster Brake Cables, Tightening Mt. Fury Roadmaster Brake Cables: adım 1, 1 resimden 1.

    • Loosen the bolt that clamps the brake cable on the brake caliper with the 10mm open-end wrench.

    Düzenle

  2. Tightening Mt. Fury Roadmaster Brake Cables: adım 2, 1 resimden 1.

    • Pull the brake cable until proper tension is acquired and the cable shows resistance.

    Düzenle

  4. Tightening Mt. Fury Roadmaster Brake Cables: adım 3, 1 resimden 1.

    • Re-tighten the clamping nut.

    Düzenle

  5. Tightening Mt. Fury Roadmaster Brake Cables: adım 4, 1 resimden 1.

    • If necessary, adjust the positioning of the caliper arms by loosening the dome nut at the pivot point and manually shifting the arms in the desired direction.

    Düzenle

  6. Tightening Mt. Fury Roadmaster Brake Cables: adım 5, 1 resimden 1.

    • For more precise adjustment of the brake cable tension, use pliers to tighten the barrel nut at the opposite ends of the handlebars on the brake levers.

    Düzenle
Sonuç

Your brakes should be fully tightened now.

11 farklı kişi bu kılavuzu tamamladı.

Yazar

5 tane daha katılımcı ile

Samantha Rawlins

Üyelik tarihi: 01/21/14

476 İtibar

3 adet Kılavuz yazıldı

Rozetler: 11

+8 tane daha rozet

Ekip

Cal Poly, Team 1-40, Maness Winter 2014 Cal Poly, Team 1-40, Maness Winter 2014 üyesi

CPSU-MANESS-W14S1G40

4 Üyeler

5 adet Kılavuz yazıldı

Bir Yorum

Thank God I didn’t have to watch someone's long winded 10 minute video explaining this.  lol Thank you for that!  Great article.  Thanks for helping me out!

rtinmotion - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 9

Son 30 gün: 16

Her zaman: 3,304