Eşyalarını Tamir Et Topluluk Mağaza

Titan High Pressure Airless Sprayer Elite 3000 Regulator Assembly Replacement

Giriş

Use this guide to replace the regulator assembly in your Titan Elite 3000 High Pressure Airless Sprayer.

Neye ihtiyacın var

  1. Titan High Pressure Airless Sprayer Elite 3000 Regulator Assembly Replacement, Safety precautions: adım 1, 3 resimden 1. Titan High Pressure Airless Sprayer Elite 3000 Regulator Assembly Replacement, Safety precautions: adım 1, 3 resimden 2. Titan High Pressure Airless Sprayer Elite 3000 Regulator Assembly Replacement, Safety precautions: adım 1, 3 resimden 3.

    • Before you begin, make sure to follow the pressure relief procedure documented in the user manual before powering down the paint sprayer and disconnecting the pump.

    • Turn off and unplug the sprayer.

    • Lay the sprayer down horizontally before continuing.

    Düzenle

  2. Titan High Pressure Airless Sprayer Elite 3000 Regulator Assembly Replacement, Remove the pressure control knob: adım 2, 1 resimden 1.

    • Use a pick tool to scrape the red paint from the side of the pressure control knob.

    Düzenle

  3. Titan High Pressure Airless Sprayer Elite 3000 Regulator Assembly Replacement: adım 3, 2 resimden 1. Titan High Pressure Airless Sprayer Elite 3000 Regulator Assembly Replacement: adım 3, 2 resimden 2.

    • Use a 2 mm Allen wrench to loosen the control knob.

    Düzenle

  5. Titan High Pressure Airless Sprayer Elite 3000 Regulator Assembly Replacement: adım 4, 2 resimden 1. Titan High Pressure Airless Sprayer Elite 3000 Regulator Assembly Replacement: adım 4, 2 resimden 2.

    • Remove the pressure control knob.

    Düzenle

  6. Titan High Pressure Airless Sprayer Elite 3000 Regulator Assembly Replacement, Remove the clip: adım 5, 3 resimden 1. Titan High Pressure Airless Sprayer Elite 3000 Regulator Assembly Replacement, Remove the clip: adım 5, 3 resimden 2. Titan High Pressure Airless Sprayer Elite 3000 Regulator Assembly Replacement, Remove the clip: adım 5, 3 resimden 3.

    • Use a flathead screwdriver to pry and remove the clip securing the stop sleeve.

    • The stop sleeve will pop out slightly due to the compressed spring behind it.

    • During reassembly, compress the stop sleeve against the spring to fully insert the clip.

    Düzenle

  7. Titan High Pressure Airless Sprayer Elite 3000 Regulator Assembly Replacement, Remove the stop sleeve: adım 6, 2 resimden 1. Titan High Pressure Airless Sprayer Elite 3000 Regulator Assembly Replacement, Remove the stop sleeve: adım 6, 2 resimden 2.

    • Remove the stop sleeve.

    Düzenle

  8. Titan High Pressure Airless Sprayer Elite 3000 Regulator Assembly Replacement, Remove the pressure spring: adım 7, 2 resimden 1. Titan High Pressure Airless Sprayer Elite 3000 Regulator Assembly Replacement, Remove the pressure spring: adım 7, 2 resimden 2.

    • Remove the pressure spring.

    Düzenle

  9. Titan High Pressure Airless Sprayer Elite 3000 Regulator Assembly Replacement, Remove the regulator assembly: adım 8, 3 resimden 1. Titan High Pressure Airless Sprayer Elite 3000 Regulator Assembly Replacement, Remove the regulator assembly: adım 8, 3 resimden 2. Titan High Pressure Airless Sprayer Elite 3000 Regulator Assembly Replacement, Remove the regulator assembly: adım 8, 3 resimden 3.

    • Use an adjustable wrench to remove the regulator assembly.

    • Your assembly may have red threadlocker around its threads.

    • During reassembly, consider applying new threadlocker to your replacement assembly.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

4 farklı kişi bu kılavuzu tamamladı.

Yazar

Alex Diaz-Kokaisl

Üyelik tarihi: 01/16/22

124.993 İtibar

582 adet Kılavuz yazıldı

Rozetler: 34

+31 tane daha rozet

Ekip

iFixit iFixit üyesi

Staff

136 Üyeler

17.410 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 12

Son 30 gün: 35

Her zaman: 498