Eşyalarını Tamir Et Topluluk Mağaza

Bu kılavuzda güncel değişiklikler var. En son onaylanmamış sürüme geçin.

Tivax MiTraveler 10Q-8 Battery Replacement

Giriş

First, you will have to refer to the back plate replacement guide. To replace the battery, be prepared to desolder two wires.

Neye ihtiyacın var

  1. Tivax MiTraveler 10Q-8 Battery Replacement, Rear Case: adım 1, 2 resimden 1. Tivax MiTraveler 10Q-8 Battery Replacement, Rear Case: adım 1, 2 resimden 2.

    • With the device face down, slide the charging port cover off on the left side of device.

    Düzenle

  2. Tivax MiTraveler 10Q-8 Battery Replacement: adım 2, 1 resimden 1.

    • Locate a Phillips 2.88mm screw at the charging port.

    Düzenle

  3. Tivax MiTraveler 10Q-8 Battery Replacement: adım 3, 1 resimden 1.

    • Use a PH000 Philips head screwdriver to remove screw.

    • Remember lefty loosey, righty tighty

    Düzenle

  4. Tivax MiTraveler 10Q-8 Battery Replacement: adım 4, 1 resimden 1.

    • To pry the back plate off, use the plastic opening tool between the back plate and front plate; start at the headphone jack.

    • Make sure the lip of the plastic opening tool is face up.

    Düzenle

  6. Tivax MiTraveler 10Q-8 Battery Replacement: adım 5, 2 resimden 1. Tivax MiTraveler 10Q-8 Battery Replacement: adım 5, 2 resimden 2.

    • Move around the device with the plastic opening tool, pushing down to release the back plate from clips.

    • You will hear popping sounds when you work around the device.

    Düzenle

  7. Tivax MiTraveler 10Q-8 Battery Replacement: adım 6, 2 resimden 1. Tivax MiTraveler 10Q-8 Battery Replacement: adım 6, 2 resimden 2.

    • Once you’ve moved around the whole device with the plastic opening tool, the back plate will completely release from the rest of the device.

    Düzenle

  8. Tivax MiTraveler 10Q-8 Battery Replacement, Battery: adım 7, 1 resimden 1.

    • The battery rests flat on the inside surface of the tablet. It is a rectangular shape and has blue and yellow tape.

    Düzenle

  9. Tivax MiTraveler 10Q-8 Battery Replacement: adım 8, 1 resimden 1.

    • There are two wires, one red and one black, that need to be desoldered from the motherboard that run to the battery.

    • Review how to solder here.

    Düzenle

  10. Tivax MiTraveler 10Q-8 Battery Replacement: adım 9, 2 resimden 1. Tivax MiTraveler 10Q-8 Battery Replacement: adım 9, 2 resimden 2.

    • Work the soldering gun on the red wire where it is connected to the motherboard. it should release from the motherboard.

    • Work the soldering gun on the black wire where it is connected to the motherboard. It will release from the motherboard.

    Düzenle

  11. Tivax MiTraveler 10Q-8 Battery Replacement: adım 10, 3 resimden 1. Tivax MiTraveler 10Q-8 Battery Replacement: adım 10, 3 resimden 2. Tivax MiTraveler 10Q-8 Battery Replacement: adım 10, 3 resimden 3.

    • Once both wires have been desoldered, the battery can be removed from the device.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

4 tane daha katılımcı ile

Maria

Üyelik tarihi: 03/16/15

210 İtibar

2 adet Kılavuz yazıldı

Rozetler: 7

+4 tane daha rozet

Ekip

Colorado Springs, Team 4-3, Panko Spring 2015 Colorado Springs, Team 4-3, Panko Spring 2015 üyesi

UCCS-PANKO-S15S4G3

3 Üyeler

10 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 3

Her zaman: 828