TomTom GO 500 Opening the Device - iFixit Tamir Kılavuzu

Neye ihtiyacın var

Adım 1 TomTom GO 500 Opening the Device

TomTom GO 500 Opening the Device, TomTom GO 500 Opening the Device: adım 1, 1 resimden 1.

Unscrew the two 3mm screws at the base of the device using the Torx T5 screwdriver.

Adım 2

TomTom GO 500 Opening the Device: adım 2, 2 resimden 1.

TomTom GO 500 Opening the Device: adım 2, 2 resimden 2.

Using the plastic opening tools, insert one opening tool into the gap between the screen casing and the motherboard casing. Then insert the other tool into one of the adjacent sides and slide it around the top.
There are 14 latches that need to be undone.
The latches break easily during the opening process so we recommend purchasing a new screen casing if they break.

Adım 3

TomTom GO 500 Opening the Device: adım 3, 1 resimden 1.

With the screen casing unlatched, locate the right side where the two connectors are.

Adım 4

TomTom GO 500 Opening the Device: adım 4, 3 resimden 1.

TomTom GO 500 Opening the Device: adım 4, 3 resimden 2.

TomTom GO 500 Opening the Device: adım 4, 3 resimden 3.

Unlatch the connectors using the plastic opening tool.
The orange rectangular connector may have come off in the process of removing the screen casing.

Adım 5

TomTom GO 500 Opening the Device: adım 5, 2 resimden 1.

TomTom GO 500 Opening the Device: adım 5, 2 resimden 2.

Separate the screen casing from the motherboard casing.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

3 tane daha katılımcı ile

jkl

Üyelik tarihi: 09/22/16

486 İtibar

2 adet Kılavuz yazıldı

+6 tane daha rozet

Ekip

UC Davis, Team 2-5, Oliver Fall 2016 UC Davis, Team 2-5, Oliver Fall 2016 üyesi

UCD-OLIVER-F16S2G5

5 Üyeler

9 adet Kılavuz yazıldı

0 Yorum

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 187