Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Parçalar ve Aletler

Giriş

The speaker is underneath the motherboard so power off the device before starting the disassembly.

  1. Unscrew the two 3mm screws at the base of the device using the Torx T5 screwdriver.
    • Unscrew the two 3mm screws at the base of the device using the Torx T5 screwdriver.

  2. Using the plastic opening tools, insert one opening tool into the gap between the screen casing and the motherboard casing. Then insert the other tool into one of the adjacent sides and slide it around the top. There are 14 latches that need to be undone.
    • Using the plastic opening tools, insert one opening tool into the gap between the screen casing and the motherboard casing. Then insert the other tool into one of the adjacent sides and slide it around the top.

    • There are 14 latches that need to be undone.

    • The latches break easily during the opening process so we recommend purchasing a new screen casing if they break.

  3. With the screen casing unlatched, locate the right side where the two connectors are.
    • With the screen casing unlatched, locate the right side where the two connectors are.

  4. Unlatch the connectors using the plastic opening tool. The orange rectangular connector may have come off in the process of removing the screen casing. The orange rectangular connector may have come off in the process of removing the screen casing.
    • Unlatch the connectors using the plastic opening tool.

    • The orange rectangular connector may have come off in the process of removing the screen casing.

  5. LCD iPhone Ekran Tamir Kit'leri

    Ömür Boyu Garantimiz kapsamındaki bütçe seçeneği.

    Shop Kits

    LCD iPhone Ekran Tamir Kit'leri

    Onarım maliyetlerini düşürün, kaliteyi değil.

    Shop Kits
  6. Separate the screen casing from the motherboard casing. Separate the screen casing from the motherboard casing.
    • Separate the screen casing from the motherboard casing.

  7. Unscrew the five 4mm screws using the Phillips #0 screwdriver.
    • Unscrew the five 4mm screws using the Phillips #0 screwdriver.

  8. Unplug the connector shown near the center of the motherboard using the tweezers. Unplug the connector shown near the center of the motherboard using the tweezers.
    • Unplug the connector shown near the center of the motherboard using the tweezers.

  9. Unplug the second connector using the plastic opening tool. Unplug the second connector using the plastic opening tool.
    • Unplug the second connector using the plastic opening tool.

  10. Remove the motherboard from the casing. Remove the motherboard from the casing.
    • Remove the motherboard from the casing.

  11. The speaker is located next to the battery.
    • The speaker is located next to the battery.

  12. Pinch the speaker at the rubber grommets and tug gently. Pinch the speaker at the rubber grommets and tug gently. Pinch the speaker at the rubber grommets and tug gently.
    • Pinch the speaker at the rubber grommets and tug gently.

  13. Insert the new speaker in the rubber grommet. Use the plastic opening tool to wrap the grommet over the speaker. Insert the new speaker in the rubber grommet. Use the plastic opening tool to wrap the grommet over the speaker. Insert the new speaker in the rubber grommet. Use the plastic opening tool to wrap the grommet over the speaker.
    • Insert the new speaker in the rubber grommet. Use the plastic opening tool to wrap the grommet over the speaker.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Nicholas Maharaj

Üyelik tarihi: 22-09-2016

101 İtibar

1 Kılavuz yazıldı

Takım

UC Davis, Team 2-5, Oliver Fall 2016 UC Davis, Team 2-5, Oliver Fall 2016 üyesi

UCD-OLIVER-F16S2G5

5 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 6

Son 30 gün: 9

Her zaman: 204