Eşyalarını Tamir Et Topluluğa Katılın Mağaza

TomTom Go 60 S Lithium Ion Battery Replacement

Giriş

After removing the covering of the device, the main battery will be located underneath the motherboard. The purpose of this battery is to allow the device to operate at full capacity.

What you need

  1. TomTom Go 60 S Lithium Ion Battery Replacement, Lithium Ion Battery: adım 1, 1 resimden 1.

    • Use the iFixit opening tool to pry open the TomTom Go 60 S. Start from a corner and drag the tool around the device.

    Düzenle

  2. TomTom Go 60 S Lithium Ion Battery Replacement: adım 2, 1 resimden 1.

    • Your device should now look like this. Make sure to disconnect the screen from the motherboard by removing the flap connecting both, so you have ample room to work on the device.

    Düzenle

  4. TomTom Go 60 S Lithium Ion Battery Replacement: adım 3, 1 resimden 1.

    • Remove all the screws that are marked in the image with a Philips #000 screwdriver and over a magnetic work mat.

    Düzenle

  5. TomTom Go 60 S Lithium Ion Battery Replacement: adım 4, 1 resimden 1.

    • Disconnect battery wires from motherboard, so that you can remove the Lithium-Ion battery.

    Düzenle

  6. TomTom Go 60 S Lithium Ion Battery Replacement: adım 5, 1 resimden 1.

    • Detach from holster and replace Lithium-Ion battery.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

2 tane daha katılımcı ile

Tomy Peralta

Üyelik tarihi: 10/04/16

133 İtibar

3 adet Kılavuz yazıldı

Badges: 6

+3 tane daha rozet

Team

USF Tampa, Team 1-6, Nance Fall 2016 USF Tampa, Team 1-6, Nance Fall 2016 üyesi

USFT-NANCE-F16S1G6

4 Üyeler

5 adet Kılavuz yazıldı

0 Comments

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 2

Son 7 gün: 9

Son 30 gün: 32

Her zaman: 2,245