Parçalar

Hiçbir parçaya gerek yok.

Peel back the sticker on the bottom of the device to reveal the two screws.
  • Peel back the sticker on the bottom of the device to reveal the two screws.

Yorum Ekle

Unscrew the two t-5 screws using a T5 Torx screwdriver.
  • Unscrew the two t-5 screws using a T5 Torx screwdriver.

Yorum Ekle

  • Wedge the flat head of the screwdriver into the edge of the device. Gently lift the screen from the cover.

Yorum Ekle

  • Release the yellow ribbon cable.

Yorum Ekle

  • Identify the green motherboard. Unscrew the three screws holding the board in place.

Yorum Ekle

  • Remove the motherboard from the back plate.

Yorum Ekle

  • Unplug the battery from the board.

Yorum Ekle

  • Plug the new battery into the white receptacle on the green motherboard.

Yorum Ekle

  • Transfer the green motherboard back into the back plate and secure it with the 3 screws.

Yorum Ekle

  • Reconnect the yellow ribbon cable and connect the screen and back plate back together.

Yorum Ekle

  • Insert the t-5 screws and tighten to secure.

Yorum Ekle

  • Replace the label to cover the screws.

Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

3 başka kişi bu kılavuzu tamamladı.

Mike Sollars

Üyelik tarihi: 11-07-2013

471 İtibar

3 adet Kılavuz yazıldı

Takım

WRI115, Team 1-1, Ruszkiewicz Spring 2013 WRI115, Team 1-1, Ruszkiewicz Spring 2013 üyesi

WRI115-RUSZKIEWICZ-S13S1G1

4 Üyeler

3 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 Gün: 8

Son 30 Gün: 41

Her zaman: 2,977