Eşyalarını Tamir Et Topluluk Mağaza

Toro Cement Mixer 68009HD 2018 Tub Replacement

Giriş

This guide shows how to remove and replace the tub for the Toro Cement Mixer 68009HD.

Warning: The tub is extremely heavy and requires at least two people to lift it. Be sure to practice safe lifting techniques.

Neye ihtiyacın var

  1. Toro Cement Mixer 68009HD 2018 Tub Replacement, Safety precautions: adım 1, 2 resimden 1. Toro Cement Mixer 68009HD 2018 Tub Replacement, Safety precautions: adım 1, 2 resimden 2.

    • Before you begin, press the engine-stop switch to turn off the engine.

    Düzenle

  2. Toro Cement Mixer 68009HD 2018 Tub Replacement: adım 2, 3 resimden 1. Toro Cement Mixer 68009HD 2018 Tub Replacement: adım 2, 3 resimden 2. Toro Cement Mixer 68009HD 2018 Tub Replacement: adım 2, 3 resimden 3.

    • Unlatch the three rubber straps securing the cowl.

    Düzenle

  3. Toro Cement Mixer 68009HD 2018 Tub Replacement: adım 3, 3 resimden 1. Toro Cement Mixer 68009HD 2018 Tub Replacement: adım 3, 3 resimden 2. Toro Cement Mixer 68009HD 2018 Tub Replacement: adım 3, 3 resimden 3.

    • Swing the cowl up until it rests securely on the frame.

    Düzenle

  4. Toro Cement Mixer 68009HD 2018 Tub Replacement: adım 4, 2 resimden 1. Toro Cement Mixer 68009HD 2018 Tub Replacement: adım 4, 2 resimden 2.

    • Slide the fuel cutoff lever to the left to cut the fuel supply to the engine.

    Düzenle

  6. Toro Cement Mixer 68009HD 2018 Tub Replacement: adım 5, 2 resimden 1. Toro Cement Mixer 68009HD 2018 Tub Replacement: adım 5, 2 resimden 2.

    • Grab the plastic housing at the end of the spark plug wire.

    • Pull firmly to disconnect the wire from the spark plug.

    Düzenle

  7. Toro Cement Mixer 68009HD 2018 Tub Replacement, Remove the tub: adım 6, 2 resimden 1. Toro Cement Mixer 68009HD 2018 Tub Replacement, Remove the tub: adım 6, 2 resimden 2.

    • Pull up on the brake lever to disengage the brake.

    Düzenle

  8. Toro Cement Mixer 68009HD 2018 Tub Replacement: adım 7, 3 resimden 1. Toro Cement Mixer 68009HD 2018 Tub Replacement: adım 7, 3 resimden 2. Toro Cement Mixer 68009HD 2018 Tub Replacement: adım 7, 3 resimden 3.

    • Rotate the tub until the yoke and dish assembly sit directly below the tub.

    Düzenle

  9. Toro Cement Mixer 68009HD 2018 Tub Replacement: adım 8, 2 resimden 1. Toro Cement Mixer 68009HD 2018 Tub Replacement: adım 8, 2 resimden 2.

    • Push down on the brake lever to re-engage the brake.

    • Make sure that the brake is fully engaged.

    Düzenle

  10. Toro Cement Mixer 68009HD 2018 Tub Replacement: adım 9, 3 resimden 1. Toro Cement Mixer 68009HD 2018 Tub Replacement: adım 9, 3 resimden 2. Toro Cement Mixer 68009HD 2018 Tub Replacement: adım 9, 3 resimden 3.

    • Use a 3/4 inch socket to remove the six nuts securing the tub to the dish.

    Düzenle

  11. Toro Cement Mixer 68009HD 2018 Tub Replacement: adım 10, 1 resimden 1.

    • Remove the six drum clamp plates from the tub mounting points.

    Düzenle

  12. Toro Cement Mixer 68009HD 2018 Tub Replacement: adım 11, 1 resimden 1.

    • Lift the tub up slightly by the gear ring to loosen the tub from the dish.

    Düzenle

  13. Toro Cement Mixer 68009HD 2018 Tub Replacement: adım 12, 3 resimden 1. Toro Cement Mixer 68009HD 2018 Tub Replacement: adım 12, 3 resimden 2. Toro Cement Mixer 68009HD 2018 Tub Replacement: adım 12, 3 resimden 3.

    • The tub is extremely heavy and requires at least two people to lift it. Be sure to practice safe lifting techniques.

    • Lift the tub straight up from the dish and remove it from the device.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

Arthur Shi

Üyelik tarihi: 01/03/18

254.625 İtibar

529 adet Kılavuz yazıldı

Rozetler: 47

+44 tane daha rozet

Ekip

iFixit iFixit üyesi

Staff

136 Üyeler

17.430 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 2

Son 30 gün: 7

Her zaman: 239