Parçalar

Hiçbir parçaya gerek yok.

  1. Using the spudger, gently pry the desired key up on one side. This will release the key.
    • Using the spudger, gently pry the desired key up on one side. This will release the key.

    • The key is held in place by very small plastic pieces. Improper removal or installation may damage key permanently and require entire keyboard replacement.

    Yorum Ekle

  2. Use a brush to remove debris and use a cleaner cloth to remove residue.
    • Use a brush to remove debris and use a cleaner cloth to remove residue.

    • Similarly, remove debris and residue from the area of the keyboard where the key was originally seated.

    Yorum Ekle

    • Once clean, set the key above its original position and firmly press it back into place.

    • If cleaned and installed properly the key should depress smoothly and spring back to normal position once released.

    Yorum Ekle

Sonuç

This is a complete guide to removing a key and cleaning the area before replacement.

Mason McCaskill

Üyelik tarihi: 18-10-2013

943 İtibar

9 adet Kılavuz yazıldı

Takım

Clemson, Team 14-2, Benson Fall 2013 Clemson, Team 14-2, Benson Fall 2013 üyesi

CLEM-BENSON-F13S14G2

3 Üyeler

9 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 2

Her zaman: 310