Ana içeriğe geç

Toshiba NB205 N330PK Keyboard Replacement

Neye ihtiyacın var

  1. Toshiba NB205 N330PK Keyboard Replacement, Power Button: adım 1, 2 resimden 1. Toshiba NB205 N330PK Keyboard Replacement, Power Button: adım 1, 2 resimden 2.
    • Start by first removing the battery.

    • Move the first release switch to the right position.

    • Move the second release switch to the right position while pulling the battery towards the top of the netbook.

  2. Toshiba NB205 N330PK Keyboard Replacement: adım 2, 2 resimden 1. Toshiba NB205 N330PK Keyboard Replacement: adım 2, 2 resimden 2.
    • Using the bit driver and a Phillips #0 bit, remove the three circled screws, 5 mm in length.

    • Using the bit driver and a Phillips #0 Bit, remove the two circled screws labelled F6. (These hold the keyboard) one screw may be under a rubber stopper

  3. Toshiba NB205 N330PK Keyboard Replacement: adım 3, 2 resimden 1. Toshiba NB205 N330PK Keyboard Replacement: adım 3, 2 resimden 2.
    • While holding the top of the netbook, flip the netbook over.

  4. Toshiba NB205 N330PK Keyboard Replacement: adım 4, 2 resimden 1. Toshiba NB205 N330PK Keyboard Replacement: adım 4, 2 resimden 2.
    • Carefully lift off the power bar assembly for access to the button and receiver.

  5. Toshiba NB205 N330PK Keyboard Replacement, Keyboard: adım 5, 2 resimden 1. Toshiba NB205 N330PK Keyboard Replacement, Keyboard: adım 5, 2 resimden 2.
    • Use the spudger to gently pry around the keyboard. This will release the keyboard assembly from the body.

  6. Toshiba NB205 N330PK Keyboard Replacement: adım 6, 2 resimden 1. Toshiba NB205 N330PK Keyboard Replacement: adım 6, 2 resimden 2.
    • Reach under the keyboard and disconnect the electrical connection.

    • Lift the broken keyboard off.

  7. Toshiba NB205 N330PK Keyboard Replacement: adım 7, 3 resimden 1. Toshiba NB205 N330PK Keyboard Replacement: adım 7, 3 resimden 2. Toshiba NB205 N330PK Keyboard Replacement: adım 7, 3 resimden 3.
    • Reattach the new electrical connection into the old connection location.

    • Place the keyboard into the original location starting with the bottom first.

    • Gently press the keyboard down to secure it into its original location.

Bitiş Çizgisi

Bir başkası bu kılavuzu tamamladı.

Mason McCaskill

Üyelik tarihi: 10/18/13

1.000 İtibar

9 adet Kılavuz yazıldı

Ekip

Clemson, Team 14-2, Benson Fall 2013 Clemson, Team 14-2, Benson Fall 2013 üyesi

CLEM-BENSON-F13S14G2

3 Üyeler

27 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 4

Her zaman: 834