Use a bit driver and a Phillips #0 bit to remove the one 5 mm retaining screw.
  • Use a bit driver and a Phillips #0 bit to remove the one 5 mm retaining screw.

  • Lift the panel up and out of the way.

Yorum Ekle

The RAM chip is secured by two retaining arms that run parallel with the chip. Gently pull these arms in opposite directions off of the chip.
  • The RAM chip is secured by two retaining arms that run parallel with the chip. Gently pull these arms in opposite directions off of the chip.

  • After the retainer arms are free, push the chip towards the top of the netbook. This will free the chip for removal.

Yorum Ekle

  • Push the replacement RAM into the original position.

  • Reattach both securing arms onto the sides of the RAM chip.

Yorum Ekle

  • Place the panel back into the securing slots and let it rest in its original position.

  • With the bit driver and Phillips #0 bit, secure the panel down with one screw.

Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Mason McCaskill

Üyelik tarihi: 18-10-2013

943 İtibar

9 adet Kılavuz yazıldı

Takım

Clemson, Team 14-2, Benson Fall 2013 Clemson, Team 14-2, Benson Fall 2013 üyesi

CLEM-BENSON-F13S14G2

3 Üyeler

9 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 1

Son 30 Gün: 1

Her zaman: 277