Giriş

This guide will go through the steps needed to install the laptop's RAM.

Turn the computer over onto its back.
  • Turn the computer over onto its back.

Yorum Ekle

Slide the lock on the left side to the unlock position.
  • Slide the lock on the left side to the unlock position.

  • Slide the lock on the right side to the unlock position until there is a clicking sound.

Yorum Ekle

  • Remove the battery by sliding it out while both locks remain in the unlock position.

Yorum Ekle

  • Turn the computer over onto the back.

  • Use a Phillips head screwdriver to remove the screw holding the RAM cover in place, and lift the cover.

  • One 4.0 mm coarse thread screw.

Yorum Ekle

  • Use a plastic opening tool to open the silver flaps on either side of the RAM.

  • Once both flaps are released, the RAM should pop up at an angle.

Yorum Ekle

  • Grasp both sides of the RAM and pull to remove it.

Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Alison Wendt

Üyelik tarihi: 18-04-2013

78 İtibar

6 adet Kılavuz yazıldı

Takım

Cal Poly, Team 21-51, Johann Spring 2013 Cal Poly, Team 21-51, Johann Spring 2013 üyesi

CPSU-JOHANN-S13S21G51

3 Üyeler

6 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 2

Son 30 Gün: 3

Her zaman: 909