Parçalar

Hiçbir parçaya gerek yok.

  1. Make sure the device is off to prevent data loss. Slide both latches to the unlocked position to release the battery.
    • Make sure the device is off to prevent data loss.

    • Slide both latches to the unlocked position to release the battery.

    • Switch the latch on the right to reveal red. The latch on the left needs to be held.

    • Pull the battery toward you while holding the left latch.

  2. Remove the sixteen screws at the locations shown with the Phillips 00 screwdriver.
    • Remove the sixteen screws at the locations shown with the Phillips 00 screwdriver.

  3. Pro Tech Toolkit içeren veya $100,00tüm siparişlerde ücretsiz kargo!

    Mağazamıza Göz Atın
  4. Pull up on the back casing and remove it, revealing the Wi-Fi card.
    • Pull up on the back casing and remove it, revealing the Wi-Fi card.

  5. Unscrew the two 3.5 mm screws from the Wi-Fi card with the Phillips 00 screwdriver. Pull the Wi-Fi card towards the battery slot to release it.
    • Unscrew the two 3.5 mm screws from the Wi-Fi card with the Phillips 00 screwdriver.

    • Pull the Wi-Fi card towards the battery slot to release it.

  6. Remove the three wires from the Wi-Fi card by pulling them straight up and off.
    • Remove the three wires from the Wi-Fi card by pulling them straight up and off.

    • The Wi-Fi card should now be free of the laptop.

    • When removing the wires be sure to remember which wire came from which port, consider marking them so that you can remember.

Sonuç

To reassemble your device, follow these instructions in reverse order.

JRJones

Üyelik tarihi: 19-04-2013

121 İtibar

5 adet Kılavuz yazıldı

Takım

Cal Poly, Team 2-19, Maness Spring 2013 Cal Poly, Team 2-19, Maness Spring 2013 üyesi

CPSU-MANESS-S13S2G19

3 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 1

Son 30 Gün: 3

Her zaman: 935