Ana içeriğe geç
  1. Remove the thirteen 1.4mm screws using a Phillips #2 screwdriver.
    • Remove the thirteen 1.4mm screws using a Phillips #2 screwdriver.

  2. Locate hidden screw found in the middle of back hardcover.
    • Locate hidden screw found in the middle of back hardcover.

    • Here you will find a proprietary Japanese Screw Head.

    • Remove screw by using tool not provided by IFixit or by using the methods found here.

  3. Peel off hard cover to expose interior of device
    • Peel off hard cover to expose interior of device

  4. Remove the two 1 mm screws using a Phillips #2 screwdriver.
    • Remove the two 1 mm screws using a Phillips #2 screwdriver.

  5. Unplug the internal cooling fan by tugging gently on the wire attatched to the device's motherboard
    • Unplug the internal cooling fan by tugging gently on the wire attatched to the device's motherboard

  6. Lift the internal cooling fan to remove the fan from the device
    • Lift the internal cooling fan to remove the fan from the device

Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 1

Son 30 Gün: 4

Her zaman: 153