1. Turn off the computer.
    • Turn off the computer.

    • Disconnect the charging cable from computer.

    • Failure to unplug the cable could result in electric shock.

    • Flip the computer upside down.

    Yorum Ekle

  2. Slide latches labeled #1 and #2, located outside the battery cover, away from each other.
    • Slide latches labeled #1 and #2, located outside the battery cover, away from each other.

    • Latch #1 will click over and stay while latch #2 will have to be held for battery to release.

    Yorum Ekle

    • Gently lift and pull the battery out of the device.

    Yorum Ekle

    • Locate the RAM vented plastic cover in the center of the device.

    Yorum Ekle

    • Loosen 1 Phillips 4.2 mm size captive screw and lift cover off device to expose 2 RAM sticks.

    Yorum Ekle

    • Locate 2 metal pinchers on either side of the 1st RAM stick.

    • Use a finger from each hand to push the 2 pinchers simultaneously away from the stick of RAM and towards the exterior of the case.

    • The RAM stick will automatically rise up. Gently pull out the RAM stick with one hand.

    • The use of a anti-static wrist strap while working with the RAM is advise to prevent electrostatic discharge(ESD) from damaging the RAM.

    Yorum Ekle

    • To remove the 2nd RAM stick, repeat previous steps.

    • You will be unable to remove 2nd RAM stick if the first one is not removed first.

    Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Marianne

Üyelik tarihi: 08-09-2014

647 İtibar

6 adet Kılavuz yazıldı

Takım

Pasco Hernando, Team 5-2, Prince Fall 2014 Pasco Hernando, Team 5-2, Prince Fall 2014 üyesi

PHSC-PRINCE-F14S5G2

10 Üyeler

6 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 0

Her zaman: 167