Ana içeriğe geç

Giriş

This replacement guide is to walk you through a RAM replacement on your Toshiba Satellite A660-ST3NX2X. Before starting this replacement, make sure you have a replacement RAM stick that is made for this computer and model. Also, make sure the computer is powered off and completely shut down before completing this replacement.

  1. Unplug all cables and other devices from the computer before starting this replacement.
    • Unplug all cables and other devices from the computer before starting this replacement.

    • Turn the computer over, so the screen is facing down and the battery is positioned in front of you.

  2. Locate the two sliding tabs on either side of the battery. Using both hands, place one finger on each tab and slide them to the sides and away from each other.
    • Locate the two sliding tabs on either side of the battery.

    • Using both hands, place one finger on each tab and slide them to the sides and away from each other.

  3. Pull the battery out, keeping the tabs pushed to the side. The right tab on this laptop stayed pushed to the right without needing to be held in place. The right tab on this laptop stayed pushed to the right without needing to be held in place.
    • Pull the battery out, keeping the tabs pushed to the side.

    • The right tab on this laptop stayed pushed to the right without needing to be held in place.

  4. MacBook Pil Tamir Setleri

    Başlangıç $69.99

    Buy Now

    MacBook Pil Tamir Setleri

    Başlangıç $69.99

    Buy Now
  5. Use a J00 bit to unscrew the single 4mm screw that leads to the RAM Memory compartment. Use a J00 bit to unscrew the single 4mm screw that leads to the RAM Memory compartment.
    • Use a J00 bit to unscrew the single 4mm screw that leads to the RAM Memory compartment.

  6. Open the hatch that holds the RAM cards.
    • Open the hatch that holds the RAM cards.

  7. Pull apart the two metal tabs that are holding the RAM cards in place. You will feel the card pop up from its held position, indicating it can safely be pulled out.
    • Pull apart the two metal tabs that are holding the RAM cards in place.

    • You will feel the card pop up from its held position, indicating it can safely be pulled out.

  8. Pull out the top RAM card. Pull out the top RAM card.
    • Pull out the top RAM card.

  9. Use tabs on the sides of the bottom RAM card to release the RAM card. Remove the bottom RAM card, just as the top RAM card was removed.
    • Use tabs on the sides of the bottom RAM card to release the RAM card.

    • Remove the bottom RAM card, just as the top RAM card was removed.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Cassie Pickett

Üyelik tarihi: 20-03-2017

201 İtibar

2 adet Kılavuz yazıldı

Takım

Texas Tech, Team S8-G1, Bennett Spring 2017 Texas Tech, Team S8-G1, Bennett Spring 2017 üyesi

TTU-BENNETT-S17S8G1

4 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 1

Son 30 Gün: 2

Her zaman: 119