Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Parçalar ve Aletler

Giriş

This replacement guide is to walk you through a screen replacement on your Toshiba Satellite A660-ST3NX2X. Before starting this replacement, make sure you have a replacement screen that is made for this computer. Also, make sure the computer is powered off and completely shut down before completing this replacement.

Parçalar

Hiçbir parça belirtilmedi.

  1. Unplug all cables and other devices from the computer before starting this replacement.
    • Unplug all cables and other devices from the computer before starting this replacement.

    • Turn the computer over, so the screen is facing down and the battery is positioned in front of you.

  2. Locate the two sliding tabs on either side of the battery. Using both hands, place one finger on each tab and slide them to the sides and away from each other.
    • Locate the two sliding tabs on either side of the battery.

    • Using both hands, place one finger on each tab and slide them to the sides and away from each other.

  3. Pull the battery out, keeping the tabs pushed to the side. The right tab on this laptop stayed pushed to the right without needing to be held in place. The right tab on this laptop stayed pushed to the right without needing to be held in place.
    • Pull the battery out, keeping the tabs pushed to the side.

    • The right tab on this laptop stayed pushed to the right without needing to be held in place.

  4. LCD iPhone Ekran Tamir Kit'leri

    Ömür Boyu Garantimiz kapsamındaki bütçe seçeneği.

    Shop Kits

    LCD iPhone Ekran Tamir Kit'leri

    Onarım maliyetlerini düşürün, kaliteyi değil.

    Shop Kits
  5. Unplug all devices and power down the computer completely. Peel back all four circular stickers that are located at each corner of the computer frame.
    • Unplug all devices and power down the computer completely.

    • Peel back all four circular stickers that are located at each corner of the computer frame.

    • A pair of fine point tweezers was used to complete this.

  6. Unscrew all four 5mm screws located underneath the stickers in each corner of the computer frame.
    • Unscrew all four 5mm screws located underneath the stickers in each corner of the computer frame.

    • The computer frame should become more loose after the screws are removed.

  7. Pry the frame of the screen away from the computer. A prying tool was used by inserting it  in the crack between the frame and the screen and running it along the edges of the frame.
    • Pry the frame of the screen away from the computer.

    • A prying tool was used by inserting it in the crack between the frame and the screen and running it along the edges of the frame.

  8. Unscrew the three black 4mm JIS screws on each side of the metal frame that is still attached to the side of the screen. Only two screws are shown in the image.
    • Unscrew the three black 4mm JIS screws on each side of the metal frame that is still attached to the side of the screen.

    • Only two screws are shown in the image.

    • The metal frame will completely separate from the computer screen.

  9. Position the screen in a way that the aluminum backing is exposed. Peel off the metal-like attachment from the back of the screen. Peel off the metal-like attachment from the back of the screen.
    • Position the screen in a way that the aluminum backing is exposed.

    • Peel off the metal-like attachment from the back of the screen.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Megan Murrell

Üyelik tarihi: 20-03-2017

322 İtibar

3 adet Kılavuz yazıldı

Takım

Texas Tech, Team S8-G1, Bennett Spring 2017 Texas Tech, Team S8-G1, Bennett Spring 2017 üyesi

TTU-BENNETT-S17S8G1

4 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 3

Her zaman: 224