Ana içeriğe geç

Parçalar

Hiçbir parça belirtilmedi.

  1. Remove the 5.75 mm screw from the cover panel. Turn the laptop over with the screen facing down.
    • Remove the 5.75 mm screw from the cover panel.

    • Turn the laptop over with the screen facing down.

  2. Lift up the cover panel using a plastic opening tool.
    • Lift up the cover panel using a plastic opening tool.

  3. Remove the 5.64 mm screw from the bottom of the crossing bar. Remove the crossing bar.
    • Remove the 5.64 mm screw from the bottom of the crossing bar.

    • Remove the crossing bar.

  4. Use a plastic opening tool to disconnect the black and white antenna cable's connectors from the Wi-Fi card. Note that the black wire is connected to the port that is labeled main.
    • Use a plastic opening tool to disconnect the black and white antenna cable's connectors from the Wi-Fi card.

    • Note that the black wire is connected to the port that is labeled main.

  5. Use fingers to push the clips away from memory card. Use fingers to push the clips away from memory card.
    • Use fingers to push the clips away from memory card.

  6. Use fingers to remove the Wi-Fi card.
    • Use fingers to remove the Wi-Fi card.

Sonuç

To reassemble your device, follow these instructions in reverse order.

3 farklı kişi bu kılavuzu tamamladı.

Garrett Gudgel

Üyelik tarihi: 05-10-2010

747 İtibar

13 adet Kılavuz yazıldı

Takım

Cal Poly, Team 4-43, Amido Fall 2010 Cal Poly, Team 4-43, Amido Fall 2010 üyesi

CPSU-AMIDO-F10S4G43

5 Üyeler

13 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 Gün: 1

Son 30 Gün: 1

Her zaman: 3,052