Ana içeriğe geç

Giriş

The tablet battery is located inside the tablet itself and will require a Phillips head screwdriver, prying tool, and tweezers. Also, there are a few wires and screws that need to be removed that require patience and a steady hand.

  1. Take the pry tool and pry open the backing of the tablet around all four sides and pull off back. Take the pry tool and pry open the backing of the tablet around all four sides and pull off back. Take the pry tool and pry open the backing of the tablet around all four sides and pull off back.
    • Take the pry tool and pry open the backing of the tablet around all four sides and pull off back.

  2. Use a Phillips #0 Screwdriver to remove four screws in the corners of the battery pack. Use a Phillips #0 Screwdriver to remove four screws in the corners of the battery pack.
    • Use a Phillips #0 Screwdriver to remove four screws in the corners of the battery pack.

  3. Apple Watch Kitleri

    Screen and battery repairs just got easier.

    Hemen Alışveriş Yapın

    Apple Watch Kitleri

    Screen and battery repairs just got easier.

    Hemen Alışveriş Yapın
  4. Remove shown wires from clips on the left hand side of the battery before pulling the battery completely out.
    • Remove shown wires from clips on the left hand side of the battery before pulling the battery completely out.

  5. Remove highlighted plug out of the circuit board before completely removing the battery pack.
    • Remove highlighted plug out of the circuit board before completely removing the battery pack.

Sonuç

To reassemble your device, follow these instructions in reverse order.

3 farklı kişi bu kılavuzu tamamladı.

Anthony

Üyelik tarihi: 28-01-2015

110 İtibar

1 Kılavuz yazıldı

Takım

Penn State, Team 2-20, Kaschak Winter 2015 Penn State, Team 2-20, Kaschak Winter 2015 üyesi

PSU-KASCHAK-W15S2G20

5 Üyeler

2 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 6

Son 7 Gün: 15

Son 30 Gün: 50

Her zaman: 4,872