Eşyalarını Tamir Et Topluluk Mağaza

Toshiba Satellite L305D-S5900 Keyboard Replacement

Giriş

If your keyboard needs a thorough cleaning or needs a replacement, this is the guide you’re looking for. This guide will show you how to safely remove your keyboard from the computer’s shell.

Neye ihtiyacın var

  1. Toshiba Satellite L305D-S5900 Keyboard Replacement, Keyboard: adım 1, 1 resimden 1.

    • Power off your laptop before beginning disassembly.

    • The plastic strip boxed in red is located above the keyboard of the computer.

    Düzenle

  2. Toshiba Satellite L305D-S5900 Keyboard Replacement: adım 2, 3 resimden 1. Toshiba Satellite L305D-S5900 Keyboard Replacement: adım 2, 3 resimden 2. Toshiba Satellite L305D-S5900 Keyboard Replacement: adım 2, 3 resimden 3.

    • There are three points of contact boxed in red needed to release located at the far left, the far right and the middle of the plastic strip.

    • Remove the plastic strip from one far end progressively towards the other end using a metal spludger.

    Düzenle

  4. Toshiba Satellite L305D-S5900 Keyboard Replacement: adım 3, 2 resimden 1. Toshiba Satellite L305D-S5900 Keyboard Replacement: adım 3, 2 resimden 2.

    • Remove the two 5.3 mm Phillips #1 screws that are beneath the strip.

    • The screws located at the far left and far right when the plastic strip is removed.

    Düzenle

  5. Toshiba Satellite L305D-S5900 Keyboard Replacement: adım 4, 2 resimden 1. Toshiba Satellite L305D-S5900 Keyboard Replacement: adım 4, 2 resimden 2.

    • Use the metal spludger to push the keyboard in the direction of the track pad and then lift the keyboard up.

    • Be careful not to pull too fast as there is still another cable attaching the keyboard.

    Düzenle

  6. Toshiba Satellite L305D-S5900 Keyboard Replacement: adım 5, 3 resimden 1. Toshiba Satellite L305D-S5900 Keyboard Replacement: adım 5, 3 resimden 2. Toshiba Satellite L305D-S5900 Keyboard Replacement: adım 5, 3 resimden 3.

    • There are two tab boxed in red is located at each side of the ZIF (zero insertion force) connector.

    • Use a metal spludger to push the tab upward in order to release the cable ribbon.

    • Carefully pull out the ribbon cable from the ZIF (zero insertion force) connector.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

1 tane daha katılımcı ile

Sing Yang Cheng

Üyelik tarihi: 10/20/16

501 İtibar

5 adet Kılavuz yazıldı

Rozetler: 6

+3 tane daha rozet

Ekip

UMass Dartmouth, Team 3-6, Isaacson Fall 2016 UMass Dartmouth, Team 3-6, Isaacson Fall 2016 üyesi

UMASSD-ISAACSON-F16S3G6

2 Üyeler

10 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 324