Giriş

This guide is useful for replacing a broken hard drive on your laptop. All of your computer's important data is stored on the hard drive. In this replacement guide, you will remove the hard drive cover to access the hard drive.

Note: Before starting any removal or installation, remember to turn off the device and to remove it from the power source.

  1. Remove the two 7 mm screws with a Phillips#00 Screwdriver
    • Remove the two 7 mm screws with a Phillips#00 Screwdriver

  2. Using a flat head from a plastic opening tool to lift open the cover.
    • Using a flat head from a plastic opening tool to lift open the cover.

  3. Pro Tech Toolkit içeren veya $100,00tüm siparişlerde ücretsiz kargo!

    Mağazamıza Göz Atın
  4. Remove the four 6mm screws with the Phillips #00 screwdriver.
    • Remove the four 6mm screws with the Phillips #00 screwdriver.

  5. Pull out black tab located on the hard drive to slide it out.
    • Pull out black tab located on the hard drive to slide it out.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Mike Kennedy

Üyelik tarihi: 18-04-2013

118 İtibar

4 adet Kılavuz yazıldı

Takım

Cal Poly, Team 2-21, Maness Spring 2013 Cal Poly, Team 2-21, Maness Spring 2013 üyesi

CPSU-MANESS-S13S2G21

4 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 1

Son 30 Gün: 19

Her zaman: 2,334