Ana içeriğe geç

Giriş

The RAM is an essential part of the computer that helps it run. Without the RAM, the computer will be slower and will not have as much memory. This guide will give the steps necessary to replace the RAM.

Parçalar

Hiçbir parça belirtilmedi.

  1. Unscrew the 4mm screw from the middle panel using a Phillips #1.
    • Unscrew the 4mm screw from the middle panel using a Phillips #1.

  2. Lift up on the middle panel and remove it.
    • Lift up on the middle panel and remove it.

  3. Pull the right clip to the right and left clip to the left using your right and left hands respectively.
    • Pull the right clip to the right and left clip to the left using your right and left hands respectively.

  4. Once the clips have been removed, the RAM will pop up.
    • Once the clips have been removed, the RAM will pop up.

  5. Slide the RAM out of its position and remove it.
    • Slide the RAM out of its position and remove it.

Sonuç

To reassemble your device, follow these instructions in reverse order.

4 farklı kişi bu kılavuzu tamamladı.

NateJohnson

Üyelik tarihi: 26-01-2014

985 İtibar

5 adet Kılavuz yazıldı

Takım

Cal Poly, Team 9-26, Maness Winter 2014 Cal Poly, Team 9-26, Maness Winter 2014 üyesi

CPSU-MANESS-W14S9G26

4 Üyeler

5 adet Kılavuz yazıldı

0 Comments

Yorum Ekle

İstatistikleri Görüntüle:

Past 24 Hours: 1

Past 7 Days: 6

Past 30 Days: 14

Her zaman: 1,218