Giriş

This guide will help you replace your CD drive if you've determined that it is no longer working.

  1. Unscrew the three 4.6 mm screws holding the panel using a #1 size Phillips head screwdriver. The panel is centered on the bottom of the laptop. Unscrew the three 4.6 mm screws holding the panel using a #1 size Phillips head screwdriver. The panel is centered on the bottom of the laptop.
    • Unscrew the three 4.6 mm screws holding the panel using a #1 size Phillips head screwdriver. The panel is centered on the bottom of the laptop.

  2. Remove the panel, firmly lifting from the indent. It is recommended that you leave the screws in the panel.
    • Remove the panel, firmly lifting from the indent. It is recommended that you leave the screws in the panel.

  3. Pro Tech Toolkit içeren veya $100,00tüm siparişlerde ücretsiz kargo!

    Mağazamıza Göz Atın
  4. Unscrew the 3.9 mm screw located at the bottom right of the panel.
    • Unscrew the 3.9 mm screw located at the bottom right of the panel.

  5. Use a plastic opening tool to pry the CD drive out of the casing.
    • Use a plastic opening tool to pry the CD drive out of the casing.

  6. Once the CD drive is out far enough to grip, pull the CD drive out to the right.
    • Once the CD drive is out far enough to grip, pull the CD drive out to the right.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Torey

Üyelik tarihi: 31-01-2013

196 İtibar

1 Kılavuz yazıldı

Takım

Cal Poly, Team 7-7, Maness Winter 2013 Cal Poly, Team 7-7, Maness Winter 2013 üyesi

CPSU-MANESS-W13S7G7

5 Üyeler

6 adet Kılavuz yazıldı

0 Yorum

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 Gün: 5

Son 30 Gün: 16

Her zaman: 1,645