Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Parçalar ve Aletler

Giriş

This guide will instruct you how to replace your Toshiba Satellite camera.

This will fix:

  • A broken video chat camera
  • A broken microphone

Parçalar

Hiçbir parça belirtilmedi.

  1. Using a plastic opening tool, remove the four plastic stickers located on the four corners of the LCD screen assembly. These plastic stickers are covering screws. Use a Phillips #1 screwdriver to remove the now uncovered 5.75mm screws and place them to the side. Use a Phillips #1 screwdriver to remove the now uncovered 5.75mm screws and place them to the side.
    • Using a plastic opening tool, remove the four plastic stickers located on the four corners of the LCD screen assembly. These plastic stickers are covering screws.

    • Use a Phillips #1 screwdriver to remove the now uncovered 5.75mm screws and place them to the side.

  2. With a plastic soft pry tool, open up the laptop display assembly by methodically prying from left to right. Be careful to not damage any internal circuitry. Do not attempt to pry apart the bottom, the LCD assembly never gets fully disassembled in this tutorial.
    • With a plastic soft pry tool, open up the laptop display assembly by methodically prying from left to right. Be careful to not damage any internal circuitry.

    • Do not attempt to pry apart the bottom, the LCD assembly never gets fully disassembled in this tutorial.

  3. LCD iPhone Ekran Tamir Kit'leri

    Ömür Boyu Garantimiz kapsamındaki bütçe seçeneği.

    Shop Kits

    LCD iPhone Ekran Tamir Kit'leri

    Onarım maliyetlerini düşürün, kaliteyi değil.

    Shop Kits
  4. Remove the 2 pieces of black tape using a sharp tool to free the camera board, note that the camera board is still connected to a cable. Remove the 2 pieces of black tape using a sharp tool to free the camera board, note that the camera board is still connected to a cable.
    • Remove the 2 pieces of black tape using a sharp tool to free the camera board, note that the camera board is still connected to a cable.

  5. Carefully disconnect the camera board from the laptop. We used tweezers. Carefully disconnect the camera board from the laptop. We used tweezers.
    • Carefully disconnect the camera board from the laptop. We used tweezers.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Robby

Üyelik tarihi: 04-02-2013

52 İtibar

1 Kılavuz yazıldı

Takım

Cal Poly, Team 7-7, Maness Winter 2013 Cal Poly, Team 7-7, Maness Winter 2013 üyesi

CPSU-MANESS-W13S7G7

5 Üyeler

6 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 4

Son 30 gün: 10

Her zaman: 1,863