Ana içeriğe geç

Giriş

The laptop screen, most of which are made of glass, is the physical surface on which visual information is presented. Sometimes screens can become faulty or can become damaged from an accident. Luckily, laptop screens are replaceable and below are the instructions to do it on your own.

Parçalar

Hiçbir parça belirtilmedi.

  1. Remove the two F3 screws on the bottom part of the screen. Remove the two F3 screws on the bottom part of the screen.
    • Remove the two F3 screws on the bottom part of the screen.

  2. Using  a plastic opening tool, carefully pry open the border of the screen away from the screen until the border is completely off. Using  a plastic opening tool, carefully pry open the border of the screen away from the screen until the border is completely off.
    • Using a plastic opening tool, carefully pry open the border of the screen away from the screen until the border is completely off.

  3. MacBook Pil Tamir Setleri

    Başlangıç $69.99

    Buy Now

    MacBook Pil Tamir Setleri

    Başlangıç $69.99

    Buy Now
  4. Using the Phillips 001, carefully remove each F3 screw on each corner of the screen. Using the Phillips 001, carefully remove each F3 screw on each corner of the screen. Using the Phillips 001, carefully remove each F3 screw on each corner of the screen.
    • Using the Phillips 001, carefully remove each F3 screw on each corner of the screen.

  5. Using the Phillips 012, remove the three F2 screws on each side of the screen. Using the Phillips 012, remove the three F2 screws on each side of the screen. Using the Phillips 012, remove the three F2 screws on each side of the screen.
    • Using the Phillips 012, remove the three F2 screws on each side of the screen.

  6. Carefully lift up the screen for an easier removal of the webcam. Then gently remove the connector by sliding it out of the webcam. Carefully lift up the screen for an easier removal of the webcam. Then gently remove the connector by sliding it out of the webcam.
    • Carefully lift up the screen for an easier removal of the webcam. Then gently remove the connector by sliding it out of the webcam.

  7. Remove the tape holding the sliding connector and gently pull it out. Remove the tape holding the sliding connector and gently pull it out.
    • Remove the tape holding the sliding connector and gently pull it out.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Rodrigo

Üyelik tarihi: 25-01-2018

133 İtibar

1 Kılavuz yazıldı

Takım

USF Tampa, Team S20-G3, Passmore Spring 2018 USF Tampa, Team S20-G3, Passmore Spring 2018 üyesi

USFT-PASSMORE-S18S20G3

4 Üyeler

7 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 0

Her zaman: 88