Ana içeriğe geç

Toshiba Satellite U405D-S2902 Display Replacement

Neye ihtiyacın var

  1. Toshiba Satellite U405D-S2902 Display Replacement, Display: adım 1, 1 resimden 1.
    • Use tweezers to remove the small rubber covers over the screws on the top and bottom of the laptop case.

  2. Toshiba Satellite U405D-S2902 Display Replacement: adım 2, 2 resimden 1. Toshiba Satellite U405D-S2902 Display Replacement: adım 2, 2 resimden 2.
    • Use a #1 Phillips screwdriver to remove the 3mm screws located on both sides of the top of the laptop as well as the lower corners.

  3. Toshiba Satellite U405D-S2902 Display Replacement: adım 3, 3 resimden 1. Toshiba Satellite U405D-S2902 Display Replacement: adım 3, 3 resimden 2. Toshiba Satellite U405D-S2902 Display Replacement: adım 3, 3 resimden 3.
    • Use a plastic opening tool to separate the front plastic panel from the back side of the top of the laptop.

    • Carefully pull the top away from the back.

  4. Toshiba Satellite U405D-S2902 Display Replacement: adım 4, 3 resimden 1. Toshiba Satellite U405D-S2902 Display Replacement: adım 4, 3 resimden 2. Toshiba Satellite U405D-S2902 Display Replacement: adım 4, 3 resimden 3.
    • Turn the laptop around.

    • Remove the webcam/microphone data cable.

  5. Toshiba Satellite U405D-S2902 Display Replacement: adım 5, 2 resimden 1. Toshiba Satellite U405D-S2902 Display Replacement: adım 5, 2 resimden 2.
    • Remove the lower lighting power supply.

    • Remove the signal light power supply and data cable.

  6. Toshiba Satellite U405D-S2902 Display Replacement: adım 6, 2 resimden 1. Toshiba Satellite U405D-S2902 Display Replacement: adım 6, 2 resimden 2.
    • Locate and remove the four 2mm #1 Phillips screws around the sidewalls of the display.

    • After removing the last screw, the screen will be very loose, be sure to keep a hand on it to prevent it from damaging the keyboard.

  7. Toshiba Satellite U405D-S2902 Display Replacement: adım 7, 2 resimden 1. Toshiba Satellite U405D-S2902 Display Replacement: adım 7, 2 resimden 2.
    • Carefully remove the screen from the side brackets.

    • Remove the LCD ribbon connector from the display.

Sonuç

To reassemble your device, follow these instructions in reverse order.

4 farklı kişi bu kılavuzu tamamladı.

Brandon Kirklen

Üyelik tarihi: 01/11/13

311 İtibar

8 adet Kılavuz yazıldı

Ekip

Cal Poly, Team 7-8, Maness Winter 2013 Cal Poly, Team 7-8, Maness Winter 2013 üyesi

CPSU-MANESS-W13S7G8

4 Üyeler

8 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 681