Giriş

This guide demonstrates how to properyly remove and replace a Toshiba Tacra 8200 RAM in order to preserve the function of the device.

  1. Turn off the device and unplug the power cord.
    • Turn off the device and unplug the power cord.

    • To remove the battery, flip the device, so that the bottom is facing upward.

  2. Slide the battery to the right side until you hear a click. Carefully remove the battery from its compartment. Carefully remove the battery from its compartment.
    • Slide the battery to the right side until you hear a click.

    • Carefully remove the battery from its compartment.

  3. Pro Tech Toolkit içeren veya $100tüm siparişlerde ücretsiz kargo!

    Mağazamıza Göz Atın
  4. Position device so the screen is face down.
    • Position device so the screen is face down.

    • Locate RAM Panel.

  5. Remove two screws labeled F4 with precision screwdriver (Phillips size #00). Set screws aside.
    • Remove two screws labeled F4 with precision screwdriver (Phillips size #00).

    • Set screws aside.

    • Remove panel.

  6. Pinch clips on each side of RAM chips to release. Gently remove RAM chips at a 45 degree angle. Use a plastic opening tool if RAM chips do not pop open.
    • Pinch clips on each side of RAM chips to release.

    • Gently remove RAM chips at a 45 degree angle. Use a plastic opening tool if RAM chips do not pop open.

  7. Insert new RAM chips and reassemble.
    • Insert new RAM chips and reassemble.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Sally

Üyelik tarihi: 17-02-2015

306 İtibar

3 adet Kılavuz yazıldı

Takım

Ohio State, Team 1-3, Buehl Winter 2015 Ohio State, Team 1-3, Buehl Winter 2015 üyesi

OSU-BUEHL-W15S1G3

3 Üyeler

3 adet Kılavuz yazıldı

0 Yorum

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 4

Her zaman: 160