Eşyalarını Tamir Et Topluluk Mağaza

TotalPond Pond Pump Impeller Rubber Stop Replacement

Giriş

The rubber stop at the back end of the impeller spindle serves the purpose of ensuring that the impeller stays on the spindle. This guide states the steps to be followed when replacing the rubber stop.

  1. TotalPond Pond Pump Impeller Rubber Stop Replacement, Impeller Rubber Stop: adım 1, 3 resimden 1. TotalPond Pond Pump Impeller Rubber Stop Replacement, Impeller Rubber Stop: adım 1, 3 resimden 2. TotalPond Pond Pump Impeller Rubber Stop Replacement, Impeller Rubber Stop: adım 1, 3 resimden 3.

    • Hold the inlet screen and rotate it counterclockwise to unscrew it. It is helpful to remove the inlet screen so that it is not damaged during the replacement process.

    Düzenle

  3. TotalPond Pond Pump Impeller Rubber Stop Replacement: adım 2, 3 resimden 1. TotalPond Pond Pump Impeller Rubber Stop Replacement: adım 2, 3 resimden 2. TotalPond Pond Pump Impeller Rubber Stop Replacement: adım 2, 3 resimden 3.

    • Firmly hold the pump block with one hand and the impeller housing with the other hand. Rotate impeller housing counterclockwise until it is released.

    Düzenle

  4. TotalPond Pond Pump Impeller Rubber Stop Replacement: adım 3, 2 resimden 1. TotalPond Pond Pump Impeller Rubber Stop Replacement: adım 3, 2 resimden 2.

    • Remove the rubber stop that is attached to the tube that runs through the middle of the impeller.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Yazar

2 tane daha katılımcı ile

Nicole Santana

Üyelik tarihi: 01/13/15

597 İtibar

5 adet Kılavuz yazıldı

Rozetler: 12

+9 tane daha rozet

Ekip

USF Tampa, Team 3-6, Hickman Winter 2015 USF Tampa, Team 3-6, Hickman Winter 2015 üyesi

USFT-HICKMAN-W15S3G6

4 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 3

Son 7 gün: 5

Son 30 gün: 7

Her zaman: 623