Eşyalarını Tamir Et Topluluk Mağaza

Trek 820 Tail Light Mounting Bracket Replacement

Neye ihtiyacın var

  1. Trek 820 Tail Light Mounting Bracket Replacement, Tail Light Mounting Bracket: adım 1, 1 resimden 1.

    • Obtain one tail light mounting bracket and one screw as shown in the picture.

    • The screw should be removed from the mounting bracket.

    Düzenle

  2. Trek 820 Tail Light Mounting Bracket Replacement: adım 2, 1 resimden 1.

    • Clean the bicycle seat post and mounting bracket.

    • Wrap the mounting bracket strap around the seat post.

    • Verify the larger piece rests towards the tail end aligned with the tires.

    • Verify the bracket's screw hole is on the right side of the bicycle.

    Düzenle

  4. Trek 820 Tail Light Mounting Bracket Replacement: adım 3, 2 resimden 1. Trek 820 Tail Light Mounting Bracket Replacement: adım 3, 2 resimden 2.

    • Locate the slot on the bracket where the strap will be inserted.

    • Insert the strap into the slot.

    • Tighten the strap just enough to keep the bracket in place.

    Düzenle

  5. Trek 820 Tail Light Mounting Bracket Replacement: adım 4, 2 resimden 1. Trek 820 Tail Light Mounting Bracket Replacement: adım 4, 2 resimden 2.

    • Insert the screw into the bracket screw hole.

    • Tighten the screw with fingers until the mounting bracket rests freely on seat post.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

6 tane daha katılımcı ile

Kaveh Karimiyanha

Üyelik tarihi: 09/24/12

813 İtibar

7 adet Kılavuz yazıldı

Rozetler: 10

+7 tane daha rozet

Ekip

Cal Poly, Team 1-1, Propen Fall 2012 Cal Poly, Team 1-1, Propen Fall 2012 üyesi

CPSU-PROPEN-F12S1G1

5 Üyeler

9 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 1,116