Tehlike
Tehlikeli Olma Potansiyeli Var
Bu talimat doğru şekilde uygulanmazsa yaralanma meydana gelebilir. Dikkatli olun ve tüm uyarıları takip edin.
Tehlike

Giriş

When your brakes get worn down, they need to be replaced. This will help keep you safe as you ride.

Parçalar

Hiçbir parçaya gerek yok.

  1. Note: In this repair guide the pictures are taken with the tire removed so that it is easier to follow our steps. However, removing the tire is not necessary to replace the brake pads.
    • Note: In this repair guide the pictures are taken with the tire removed so that it is easier to follow our steps. However, removing the tire is not necessary to replace the brake pads.

    • Unscrew the brake pad cap with a T25 screwdriver bit.

  2. Grab and pull out the spring between the brake pads.
    • Grab and pull out the spring between the brake pads.

    • Slide out the back brake pad first. Then slide out the front brake pad.

    • Slide in the new brake pads with the first going in the front.

    • Then slide in the other pad in the back.

    • Make sure each brake pad is facing the right way.

    • Push the spring back into place between the two brake pads so the spring is visible in the hole shown here.

    • Screw the brake pad cap back on.

    • Adjust the red knob as necessary (directions are noted on the knob).

Sonuç

Now your bike should actually be able to stop.

Ben Hartinger

Üyelik tarihi: 27-01-2014

340 İtibar

3 adet Kılavuz yazıldı

Takım

Cal Poly, Team 1-37, Maness Winter 2014 Cal Poly, Team 1-37, Maness Winter 2014 üyesi

CPSU-MANESS-W14S1G37

4 Üyeler

6 adet Kılavuz yazıldı

0 Yorum

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 0

Her zaman: 279