Eşyalarını Tamir Et Topluluk Mağaza

Tribit XSound Go TS-BTS20 Passive Radiator Replacement

Giriş

The Tribit XSound Go bluetooth speaker delivers rich, clear, room-filling sound like you've never heard before. Amazing full-range drivers, passive radiators create an auditory experience that's a delight for the senses.

Neye ihtiyacın var

  1. Tribit XSound Go TS-BTS20 Passive Radiator Replacement, Passive Radiator: adım 1, 2 resimden 1. Tribit XSound Go TS-BTS20 Passive Radiator Replacement, Passive Radiator: adım 1, 2 resimden 2.

    • Insert a spudger in the seam between the front speaker grill and chassis.

    • Pry around the perimeter until the front grill releases.

    • Remove the front grill.

    Düzenle

  2. Tribit XSound Go TS-BTS20 Passive Radiator Replacement: adım 2, 1 resimden 1.

    • Unscrew all the screws with the Phillips screwdriver, on the opened panel.

    • Lift off the speaker housing.

    Düzenle

  4. Tribit XSound Go TS-BTS20 Passive Radiator Replacement: adım 3, 2 resimden 1. Tribit XSound Go TS-BTS20 Passive Radiator Replacement: adım 3, 2 resimden 2.

    • Hold the frame which has the passive radiator in the middle.

    Düzenle

  5. Tribit XSound Go TS-BTS20 Passive Radiator Replacement: adım 4, 1 resimden 1.

    • Use a spudger to push the damaged passive radiator off the frame

    Düzenle

  6. Tribit XSound Go TS-BTS20 Passive Radiator Replacement: adım 5, 1 resimden 1.

    • Insert the new passive radiator into the frame.

    • The passive bass radiators seal out water from inside the device. Removing them multiple times may compromise the waterproof nature of the speaker.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 2

Son 30 gün: 10

Her zaman: 36